Multimeters

We stock many different kinds of electronic meters, measuring tools and instruments.


 


Pocket Size Digital Multimeter


MCH 830LN

$19.99

3 1/2  Digits LCD Display, max reading 1999
 
Function Range Best Accuracy
DC Voltage 200mV, 2V,20V,200V,600V ± (0.5% + 2)
AC Voltage 200V,600V ± (1.2% + 10)
DC Current 20uA,200uA,2mA,20mA,200mA,10A ± (1% + 2)
Resistance 200Ω,2KΩ,20KΩ,200KΩ,2MΩ ± (1% + 5)
Size 105(L) x 60 (W) x 27(H) mm  
Included accessories Test leads, 9 V battery
Weigh 140g ( included battery and holder)

 





 


Digital Multi-meter


MCH 9880D

$69.00

Function Range Accuracy
DC Voltage 200mV/2V/20V/200V ± (0.5% +1)
1000V ± (0.8% +2)
AC Voltage 2V/20V/200V ± (0.8% +3)
750V ± (1.2% +
DC Current 2mA / 20mA  
200mA ± (1.5% +1)
10A ± (2.0% +5)
AC Current 2mA / 200mA  
200mA ± (1.8% +3)
10A ± (3.0% +7)
Resistance 200Ω/2kΩ/20kΩ/200kΩ/2mΩ/20mΩ ± (0.8% +1)
200mΩ ± (5.0% +10)
Capacitance 20nF/200nF/2µF/20µF/200µF  
  20nF/200nF/2µF/200µF ± (4.0% +5)
Inductance 20mH/200mH/2H/20H ± (3.0% +5)
Frequency 20kHz  
Included Test leads, Multi-Function Socket,  9V (6F22) Battery
Weight ~ 380g
Size 188 x 92 x50 mm

 

MS8050

$430.80

VC8045-II

$119.88

 

 



MTP 2327
$93.65



Click image to enlarge - LCR Meter
MTP MS-5300
$155.00

  • Design to international safety standard IEC1010-1
     
  • Over molding rubber case protects the meter
     
  • RS-232 interface
     
  • Resistance, capacitance, inductance
     
  • Auto and manual range, data hold
     
  • Min/Max value measurement
     
  • Auto power off/disable auto power off
     

Included accessories: 1 x 3.6V battery, test leads, software

Click image to enlarge - Electronic Multimeter
MTP 2850
$99.00

  • 3999 counts large LCD display
     
  • True RMS
     
  • RS-232 pc interface
     
  • Temperature, capacitance, frequency and duty cycle measurements

Included accessories: 1 x 9V battery, test leads, temperature probe MS-3400, RS-232 serial cable, PC software DC-R, carrying case

Click image to enlarge - Bench Multimeter
MTP 2950
$625.00


 

  • Color VFD double display bench meter
     
  • 53000 counts high accuracy
     
  • Linear frequency measurement, logic duty ratio measurement
     
  • AC/DC true RMS measurements
     
  • Up to 300 full screen data memory
     
  • dBm measurement

Included accessories: power cable, test leads, RS-232 serial cable, PC software CD-R, deluxe carrying case

Click image to enlarge - Digital Multimeter
TES 2700
$129.00

  • Autoranging and Auto power off
     
  • 3200 count LCD with analog bargraph
     
  • Data-hold mode available at ohms
     
  • Overload protection up to 660Vrms
     
  • Two years warranty

Included accessories: 2 x AAA batteries, 1 spare fuse F0.5A-250V, test leads TL-D33, protective holster

Click image to enlarge - Dual Channel DMM
PROVA 903
$475.00

  • 60,000/60,000 Counts Dual Channels
     
  • Compare Voltage at two different Locations
     
  • Read Voltage and Current at the same time
     
  • Standalone Data Logging
     
  • Optical Isolated RS-232C ASCII Interface
     
  • True RMS
     
  • The New Standard of DMM

Click image to enlarge - Industrial Multimeter
MTP 2860
$189.00


 

  • DMM with a combination of precision, features, easy-to use, safety and reliability
     
  • True RMS AC voltage and current readings
     
  • Min/max recording
     
  • Peak recording as well as frequency and capacitance ranges
     
  • Full range protection
     
  • Water proof

Included accessories: 1 x 9V battery, test leads

 

LCR Meter
 


VC 6243A
Was : $59.00
Now $52.00



 

3 1/2 digits LCD display

 

Specifications Range
Capacitance 200p/2n/20n/200n/2u/20u/200uF±2.5% + 5, 2000uF±5% + 5
Inductance 200uH±3% ± 5, 2m/20m/200m/2H±2.5% ± 5, 20H±5% ± 5
Resistance 200/2K/20K/200KΩ ±0.8% ± 5, 20MΩ ±2% ± 5
Included Test leads,  9V (6F22) Battery
Size 190 x 91 x 40mm
Weight ~400g

 

Multimeter (Analog)

M213
POCKET Analog   Multimeter

$ 16.00

Sale: $9.99


ET - 1043
Analog   Multimeter

$ 19.00

*   A large and bright meter with a scale length of 80 mm and its
     sensitivity of 44µ A at full scale.

*    Series capacitor terminal   (Out Put) blocks DC to enable   
      measurement of only AC  components.

*   Continuity check with buzzer sound.

  Fuse protection

   DC Voltage: 0.1/0.5/2.5/10/50/250/1000V ±3%f.s.

   AC Voltage: 10/50/250/1000V ±4%f.s.

*    DC Current:50µ/2.5m/25m/250mA ±3%f.s.

*    Resistance: X1/X10/X100/X1K/X10KΩMAX±3% of arc.

   dB:-10dB~+22dB

*    LI:150µ/1.5m/15m/150mA

   hFE:0~1000

*    Dimesion:150(L) X 100(W) X 36(H) mm

   Weight: Approx  X .250g(including battery)

MTP 2860
Analog Multimeter

Click image to enlarge - Analog Multitester
$59.00

  • Transistor test Iceo: 150uA, 15mA, 150mA
     
  • Measures hFE: 0-1000 (with connector extra)
     
  • Decibelmeter: -10 to +2.2dB, 0dB = 1mw/600Ù

Included accessories: Test leads, holster

 

81-011-1
 

Analog Multimeter



$22.00

  • Audible continuity checker

  • db output

  • Mirror scale

  • C/w Test leads & battery

D.C. Volts:  2.5, 10, 50, 250, 500V (5%)
A.C. Volts:  10, 50, 250, 500V (5%)
D.C. Current:  5, 50, 500mA, 10A (5%)
Resistance:  x1Ω, x10Ω, x1KΩ
Size:  80 x 165 x 59mm (390g)

 

Click image to enlarge - Digital Multimeter
TES 2712
$139.00

  • 3-1/2 LCD
     
  • Data-hold and Peak-hold function
     
  • Inductance, capacitance & ohm
    measurement
     
  • Two years warranty

MODEL

TES-2620



Price: $272.99

  • 3-3/4 Digital LCD with bar-graph
  • Waterproof ABS housing
  • Auto-power off
  • 2 years warranty
  • Ohms, Diode Audible continuity, Capacitance input, Overload protection to 600 Vrms

  • TES-2620

    True RMS Multimeter


    Specifications


    IEC 1010

    1000V CAT III POLLUTION 2


    Voltage (AC/DC):

    Range: 400m/4/40/400/750V (AC)/1000V (DC)

    Accuracy: DC - 0.5% rdg + dgt | AC - 1.2% rdg + 5 dgts

    Resolution: 0.1 µVolts

    Overload Protection: 1100VDC & 800VAC

    Current (AC/DC)

    Range: 4m/40m/400m/20A (DC/AC)

    Accuracy: DC - 1% rdg + 1 dgt | AC - 1.5% rdg + 5 dgts

    Resolution: 1µA

    Overload Protection: 0.5A/250V fuse & Diode (AC/DC)

    Continuity Beeper:

    Operation Resistance -below 40Ω

    Max open circuit voltage: 0.5V

    Max open circuit voltage: 3V

    Ohms (Resistance):

    Range: 400/4K/40K/400K/4M/40MΩ

    Accuracy: 0.75% rdg + 3 dgts

    Resolution: 100mΩ

    Overload Protection: 600Vrms

    Open Circuit Voltage: < Below 0.5V

    Frequency (Hz):

    Range: 100/1K/10K/100K/500KHz

    Accuracy: 0.1% rdg + 2 dgts

    Resolution: 0.01Hz

    Sensitivity: 100mV/1V/10V

    Sampling Rate:

    20 times/sec for Bar-graph indication

    2 times/sec for digital display

    Accessories:Test leads, Spare fuse, Battery, Insuruction manual, Holster case

    Optional Accessories: Carrying case


    MODEL

    TES-2804



    Price: $454.99

  • 50,000 Counts True RMS Reading
  • Capacitance check (500nF-500µF)
  • 15,000 Datalogging Capacity
  • RS-232 Interface (Software Included)
  • Back Light Illumination

  • TES-2804

    High Accuracy Autoranging Multimeter (RS-232)


    Specifications

    IEC 1010

    1000V CAT III 600V


    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500mV

    10µV

    0.09% rdg + 5 dgts

    = 10MΩ

    660Vrms


    DC Voltage (Autorange & Manual range)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    0.5V

    0.1 mV

    0.09% rdg + 5 dgts

    = 10MΩ

    660Vrms

    5V

    0.1mV

    50V

    10mV

    500V

    100mV

    600V

    100mV


    AC Voltage (Autorange & Manual range)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    5V

    0.1 mV

    0.09% rdg + 20 dgts

    = 10MΩ

    660Vrms

    50V

    10mV

    500V

    100mV

    600V

    100mV


    Frequency (Hz) (Autorange)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500Hz

    0.01KHz

    0% rdg + 40 dgts

    200mV

    660Vrms

    5KHz

    0.1Hz

    50KHz

    1Hz

    500KHz

    10Hz

    400mV

    5MHz

    100Hz

    1V


    Audible Continuity

    Range

    Resolution

    Open Circuit Voltage

    Continuity Beeper

    Overload Protection

    •))

    0.01Ω

    = 3V

    ≤ Approx. 40Ω

    660Vrms


    Resistance

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500Ω

    0.01Ω

    0.3% rdg + 10 dgts

    3V

    660Vrms

    5KΩ

    0.1Ω

    50KΩ

    500KΩ

    10Ω

    5MΩ

    100Ω

    0.9% rdg + 20 dgts

    50MΩ

    1KΩ

    2% rdg + 20 dgts


    Diode Test

    Range

    Resolution

    Short Circuit Current

    Open Circuit Voltage

    Overload Protection

    0.1mV

    0.8mA typical

    3V

    660Vrms


    Capacitance (F)

    Range

    Resolution

    Accuracy

    Overload Protection

    500nF

    100pF

    0.09% rdg + 20 dgts

    660Vrms

    5µF

    1nF

    50µF

    10nF

    500µF

    100nF


    AC Current (Manual range & Autorange)

    Range

    Resolution

    Accuracy

    Overload Protection

    5000µA

    0.1µA

    0.09% rdg + 20 dgts

    0.5A/600V

    500mA

    0.01mA

    10A

    1mA

    20A/600V


    DC Current (Manual range & Autorange)

    Range

    Resolution

    Accuracy

    Overload Protection

    5000µA

    0.1µA

    0.5% rdg + 20 dgts

    0.5A/600V

    500mA

    0.01mA

    10A

    1mA

    20A/600V


    MODEL

    TES-2802



    Price: $523.99

    TES-2802

    Auto Range Datalogger Multimeter (RS-232)


    Specifications


    IEC 1010

    CAT III 600V


  • Inductance Measurement (40mH ~ 40H)
  • Capacitance Measurement (40nF ~ 40µF)
  • Temperature Measurement (-50C ~ 1300C, -58F ~ 1900F)
  • Data logger function. (Memory: 16000 records)
  • True RMS V, A
  • Also provides MAX/MIN REL and data HOLD mode.
  • DMM talks with PC via RS-232 interface
  • AUTO-power off
  • AUTO-Ranging on Volt, Ohm, Frequency
  • 3-3/4 Digital LCD with bar-graph
  • Back Light


  • MODEL

    TES-2712 LCR



    Price: $126.99


  • 3 1/2" LCD
  • Data-hold and Peak-hold function
  • Inductance, capacitance and ohm measurement
  • Two years warranty
  • TES-2712

    Multimeter (RS-232)


    Specifications


    IEC 1010

    CAT II 600V POLLUTION 2


    Voltage (AC/DC)

    Range: 200m/2/20/200/600VDC/600VAC

    Accuracy: DC - 0.5% rdg + 1 dgts, AC - 1% rdg + 5 dgts

    Input Impedence: 10Mω(DC)

    Current (AC/DC)

    Range: 200µ/2m/20m/200m/20A

    Accuracy: DC - 1% rdg + 1 dgt, AC - 1.2% rdg + 3 dgts (50~500Hz)

    Resolution: 0.1µA

    Inductance

    Range: 20m/200m/2/20H

    Accuracy: 5% rdg + 10 dgts

    Resolution: 10µH

    Capacitance

    Range: 2000P/200n/2µ/20µF

    Accuracy: 3% rdg + 10 dgts

    Resolution: 1PF

    Accessories

    Test leads, Spare Fuse, Battery, Operation Instruction, Optional rubber holster



    MODEL

    MTP-1010



    Price: $18.99


    MTP-1010

    Pocket size (DMM)


    Features:

    POCKET SIZE DDM

    DC Voltage 2V +/- 0.5%, 20/200/500V +/- 0.8%

    AC Voltage: 200/500V +/- 1.2%

    DC Current: 200mA +/- 1.5%

    Resistance: 2K/20K/200K/2Mω +/- 1.0%

    Continuity checking with buzzer

    Diode test

    Power cource: 12V GP23A x 1

    Size/Weight: 70x120x18mm x 110g (including battery)

    MODEL

    MTP-1020



    Price: $36.99


    MTP-1020

    Auto-Range (DMM)


    Features:

    POCKET SIZE DDM

    Auto-power off

    Display: 14x35mm LCD, max reading 3999 counts

    Autoranging on all functions

    DC Voltage 4V +/- 0.5%, 40/400/600V +/- 0.8%

    AC Voltage: 4/40/400/600V +/- 1.2%

    DC Current: 40/400mA +/- 2.0%

    AC Current: 40/400mA +/- 3.5%

    Resistance: 400/4K/40K/400K/4Mω +/- 1.5% 40Mω +/- 3.0%

    Continuity checking with buzzer

    Diode test

    Power cource: 1.5V LR44 x 2

    Size/Weight: 70x120x18mm x 110g (including battery)


    MODEL

    TES-310 (20ω/V)



    Price: $53.99


    TES-310

    Analog Multimeter


    Specifications


    Voltage (AC/DC)

    Range: DC 0/0.25/2.5/10/25/50/250/1000V

    Input Impedence: 20Kω/V (DC)

    Range: AC 0/10/50/250/1000V

    Input Impedence: 9Kω/VAC

    Accuracy:

    DC Voltage: +/- 3% f.s.

    AC Voltage: +/- 4% f.s.

    AC/DC current: +/- 3% f.s.

    Ohms: +/- 3% of scale length

    AF output (dB): -10 to 22dB

    Overload Protection: 0.5A/250V Fuse and Diode

    Temperature: -30C to 200C (TP-R04)

    Current (AC/DC)

    Range: DC 0/50µ/25m/250m/10A

    Voltage Drop: 250mV

    Ohm

    Range: x1, x100, x1K, x10K

    Power: 1pc of 9V 006P 2pcs of AA batteries, 1.5V


    MODEL

    MTP Volt Stick®



    Price: $24.99


    Range: 90 - 660VAC

    Volt Stick® is an instrument for safety checking the presence of an AC voltage in cables, wall sockets, fuses, circuit breakers, junction boxes, etc.

    No current flow is needed for correct operation of the Volt Stick®.

    When a voltage is detected, a red indicator in the plastic tip of the Volt Stick® illuminates.

    m # 001

    MODEL

    Magnet Stick®



    Price: $34.99


    Solenoid tester

    Detects presence of AC, DC or permanent magnetic field.

    Sensitivity: 300 Gauss

    Test magnet included

    Power Supply: 2 x AAA (LR03) batteries supplied

    Weight: 60gr including batteries

    Working temperature: -20 to +50C

    Material: Aluminum, PP COP

    m # 002

     

    POWER ANALYZER

    WM-01/WM-02

    WM-01 PRICE: $890.00

     

    WM-02 PRICE: $1150.00

     

    WM-02 1012 Points data-logging capacity PF (Direct Calculation from W, V, A)
    PF= Watt/(V*A)

    Frequency (Sensitivity 5V)
    Range: 2K/20K/200K/2M/20MHz
    Accuracy: 0.5% of rdg ± 2 dgts
    Resolution: 1Hz-10KHz
    Numerical Display: 3-1/2 digits LCD
    Over Range Indication: OL on LCD
    Sampling Rate: 2.5 times/sec.
    Power Source: Eight 1.5V AA batteries
    Power Consumption: 22mA approx.
    Operating Temperature: 0~40°C
    Operating Humidity: Less than 80%
    Dimension: 352mm (L) x 300mm(W) x 100mm(H) 13.9”(L) x 11.8”(W) x 3.9”(H)
    Weight: 1.637Kg (approx.) 3.6 lbs 9Approx.)

    Accessories included: Carrying Case, Instruction Manual, Safety Test Lead, Battery, AC Adaptor, Software, RS 232 Cable
    Features:
    • 4 LCD Displays with W, PF, V, A
       
    • Easy Plug-in and Test
       
    • RS-232 Computer Interface
       

      From Software you could also observe:
       

      • Phase Angle
         

      • Apparent Power
         

      • Reactive Power
         

      • Kilowatt Hour
         

      • Estimated kilowatt per day/month/year
         

      • Energy Cost/KW/h.
         

      • Serial Number/record print
        out of your appliance measured



      Watt (Autorange, AC + DC)
      Range: 2000
      Accuracy: ± 0.9% of rdg ± 4 dgts
      Resolution: 0.1W
      Input: 0-300V, 0-20A, 0-400Hz,
      PF = 0-1

      Voltage (True RMS, Autorange,
      AC + DC)

      Range: 750
      Accuracy: 0.5% of rdg ± 3 dgts
      Resolution: 0.1V
      Overload Protection: 1000VDC/750VAC

      Currect (True RMS, AC + DC)
      Range: 20A
      Accuracy: 0.5% of rdg ± 3 dgts
      Resolution: 0.01
      Overload Protection: 20A, fused


     
    TES 3600
    • 4 Current Clamp Probes
       
    • True RMS Sensing
       
    • Datalogger (512 KB Memory, 20,000 Reading)
       
    • Displays 10 Readings at the same time
       
    • Software to view Real Time Waveform
       
    • RS-232 interface / software

    $2450.00


     


    PROVA 6830
    $3650.00

    • Analysis for 1P2W, 1P3W, 3P3W, 3P4W
       
    • True RMS value (V 123 and I 123)
       
    • Active power (W, kW, MW, GW)
       
    • Apparent and reactive power (KVA, KVAR)
       
    • Power factor (PF), phase angle (Ø)
       
    • Energy (WH, KWH, KVARH, PFH)
       
    • Current measurement from 0.1 mA to 3000A, capable of
      analysing IT standby power measurement consumption to the
      maximum demand of a factory
       
    • Display of 35 parameters in one screen (3P4W)
       
    • Programmable CT (1 to 600) and PT (1 to 3000)
       
    • Display of overlapped voltage & current waveform
       
    • Average demand (AD in W, KW, MW)
       
    • Maximum demand (MD in KW, MW, KVA, MVA)
      with programmable period
       
    • Harmonic analysis to the 99th order
       
    • Displays 50 harmonics in one screen with waveform

     

    • Displays waveform with peak values (1024 samples/period)
       
    • Analysis of total harmonic distortion (THD-F)
       
    • Graphic phasor diagram with 3 phase system parameters
       
    • Captures 28 transient events (time + cycles) with programmable threshold (%)
       
    • DIP, SWELL, and OUTAGE are included in transient events
       
    • 3 Phase voltage or current unbalanced ratio (VUR, IUR)
       
    • 3 Phase voltage or current unbalanced factor (d0%, d2%)
       
    • Analysis of total harmonic distortion (THD-F)
       
    • Calculated unbalanced current through neutral line (ln)
       
    • 512K memory with programmable interval (1 to 6000 seconds, 17000 records for 3P4W system)
       
    • Output of waveforme, power parameters
      and hamonics at command
       
    • Large Dot Matrix LCD display with backlight
       
    • Built-in timer and calendar for data logging
       
    • Option: 300XP portable thermal printer
       
    • Optical isolated RS-232C interface

     

     

    Ground Resistance Meter

    Click image to enlarge - Ground Resistance Meter
    PROVA 5601
    $1499.00



     

    • Non-Contact Ground Resistance Measurement
       
    • No Auxiliary Electrode Needed
       
    • 0.025 - 1500
       
    • Ground Wire O 23mm/0.9”
       
    • Leakage Current (0.200mA - 10.00mA)
       
    • Hi-Lo Alarm (Go - No Go)
       
    • Memory of 116 records
       
    • Programmable Data Logging
       
    • Auto Detect of Jaw Open and Ground Noise
       
    • Compliant with Safety Standard EN61010-2

    General Specifications:

    Jaw Opening: 23mm (0.9”)
    Power Source: 9V Battery
    Power Consumption: 40mA
    Operating Temperature: 0°C to 40°C
    Operating Humidity: Less than 80% RH
    Dimensions: 258mm(L) x 100mm(W) x 47mm(H)
    10.2”(L) x 4”(W) x 1.9”(H)
    Weight: 640g (1.4lbs)

    Electrical Specifications: (23°C ± 5°C)

    Groud Resistance (Autorange):
    Range
    • 0.025 ~ 0.250
       
    • 0.250 ~ 9.999
       
    • 10.00 ~ 99.99
       
    • 100.0 ~ 199.9
       
    • 200.0 ~ 400.0
       
    • 400.0 ~ 600.0
       
    • 600.0 ~ 1500.0


    Resolution

    • 0.002
       
    • 0.02
       
    • 0.04
       
    • 0.4
       
    • 2
       
    • 5
       
    • 20


    Accuracy of reading1

    • ±1.5% ±0.05
       
    • ±1.5% ±0.1
       
    • ±2.0% ±0.3
       
    • ±3.0% ±1.0
       
    • ±5.0% ±5
       
    • ±10% ±10
       
    • ±20% (Approx.)


    1 Loop resistance noninductive, external field < 50A/m, external electrical field < 1V/m, conductor centered.

    2 Resistance Measurement Frequency: 1.667KHz
     

    Continuity
    Beep if resistance < 40.00 (Approximately)

    Ground / Leakage Current (Autorange, 50/60Hz, True RMS, Crest Factor < 3.0)

    Range
    • 0.200 ~ 1.000mA
       
    • 1.00 ~ 10.00mA
       
    • 10.0 ~ 100.0mA
       
    • 100 ~ 1000mA


    Resolution

    • 0.001mA
       
    • 0.01mA
       
    • 0.1mA
       
    • 1mA


    Accuracy of reading1

    • ±2.5% ±0.05mA
       
    • ±2.5% ±0.05mA
       
    • ±2.0% ±0.3mA
       
    • ±2.0% ±3mA


    Ground / Leakage Current (50/60Hz, True RMS, Crest Factor < 3.0)
    Range

    • 0.20 ~ 10.00A


    Resolution

    • 0.01A


    Accuracy of reading1

    • ±2.0% ±0.03A


    Digital Earth Tester
     

    TES-1700

    PRICE: $442.80

    Features:

    • To ensure the satisfactory earth installation for electricity supply, wiring safety and communication system
       
    • Earth voltage 0-400V (50Hz / 60Hz)
       
    • Earth Resistance 0-40, 0-400 & 0-4000
       
    • Capable of measuring earth voltage.
       
    • Data hold function.
       
    • Auto power off function.
       
    • Auto power off function:
      The timer operates automatically about 3 minutes when the “Test Button Switch” are pressed to keep the tester power on.
       
    • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
       
    • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accesories. (unit can be hung
      from the neck for simplified measurement).
       
    • Automatic warning when resistance of auxiliary earth Spikes is in excess of tolerance
       
    • Designed to meet IEC1010-1 safety standard.
       

     

    Digital Insulation Tester


    1010T
    Price: $57.00


    ZC11D-4
    Price: $70.00

    Click image to enlarge - Insulation Tester

    MTP 4010

    • 1 mA test currrent for meg ohm range at rate voltage
       
    • Large dual display with backlight
       
    • Test hold function for easy operation
       
    • Over range indication
       
    • Low battery indication

    $230.00



     

    TES 1601
    Click image to enlarge - Autoranging Insulation Tester
    $499.00


     
    • 4000 M/V Reading/10,000M analog indication
       
    • “Test Hold” function easy to catch up the value
       
    • Backlight illumination
       
    • 3-3/4 Digital LCD, 4000 Counts
       
    • Autorange for Mega Ohm range
       
    • 50 segments Log Scaled Analog Display
       
    • Easy to carry testing package
       
    • Tests insulation at rated voltage into a 1mA load
       
    • 200mA short circuit continuity current
       
    • Meet VDE 0413
       

    VDE 0413 / IEC 1010
    General Specifications:


    Display: 80 x 50mm Big LCD Panel with 50 segments analog display Max Reading 4000
    Over Range Indication: “OL” will be shown on the LCD Panel when out of range measurement is made
    Low Battery Indication: The
    will be shown when the battery needs to be changed
    Sampling Time: 2.5 times/sec Digital Display 10 times/sec Bargraph
    Power Source: Eight 1.5Volt AA size Battery
    Operating Temperature and Humidity: 0°C to 40°C (32°F to 104°F), below 80% RH
    Storage Temperature: -10°C to 60°C (14°F to 140°F)
    Dimensions: 200(L) x 140(W) x 95(H)mm
    Weight: Approx. 900g (with battery)
    Accessories: Test Lead, Battery, Instruction Manual

    Electrical Specifications:

    AC Voltage

    Range: 600V ACV
    Resolution: 0.1V
    Accuracy: 1.5% rdg + 3 dgt (1V~600V)

    Continuity
    Range: 400 (Ish>200mA)
    Resolution: 0.1
    Accuracy: 1% rdg + 5 dgt

    Meg Ohm
    Range:
    4000M/250V w/autorange 4000M/400M/40M/4M
    4000M/500V w/autorange 4000M/400M/40M/4M
    4000M/1000V w/autorange 4000M/400M/40M/4M
    Resolution: 4000M/250V, 1 Count/1K
    4000M/500V, 1 Count/1K
    4000M/1000V, 1 Count/1K
    Accuracy: 3% rdg + 5 Count (under 1G)
    5% rdg + 3 Count (under 4G)

    TES 3660
    Click image to enlarge - Insulation Tester
    $299.00


     
    • Large LCD with analog bar graph and digital display
       
    • 250V, 500V, 1000V output voltage for insulation MOhms testing
       
    • 4000MOhms insulation testing with automatically switch to voltage measurement
       
    • Lo OHM function for testing connections
       
    • Autodischarge of capacitive voltage charges
       
    • Last reading Hold display
       
    • AC/DC voltage measurement up to 1000V
       
    • Manual data memory and read function (9sets)
       
    • Meets EN61557 and EIC1010-1, CAT III 1000V
       
    • Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H)
       

    MTP 4050

    $750.00

    • Smart microprocessor controlled
       

    • Insulation resistance auto ranging on all ranges
       

    • Bar graph indicates test voltage rise and decay can be observed during tests
       

    • Warning and display of external voltage presence
       

    • Measuring insulation test time

     

    MTP 6213 AIN

    $1045.00

    • Variable high voltage 500V - 10 kV
       
    • Shows dielectric absorption ration and polarization index
       
    • Voltage steps of 500V
       
    • Color coded terminals-test leads
       
    • Warning voltage detection
       
    • Large LCD display with timer
       
    • Fast calculation and display
       
    • Automatic discharge of circuits
       
    • Guard connection to reduce errors

    Included accessories: 8 x C batteries, test leads, shoulder belt, integrated carrying case


     

    Autoranging Insulation Tester

    TES-1601

    Click image to enlarge - Autoranging Insulation Tester

     

    PRICE: $454.80

     

    Electrical Specifications:

    AC Voltage

    Range: 600V ACV
    Resolution: 0.1V
    Accuracy: 1.5% rdg + 3 dgt (1V~600V)

    Continuity
    Range: 400 (Ish>200mA)
    Resolution: 0.1
    Accuracy: 1% rdg + 5 dgt

    Meg Ohm
    Range:
    4000M/250V w/autorange 4000M/400M/40M/4M
    4000M/500V w/autorange 4000M/400M/40M/4M
    4000M/1000V w/autorange 4000M/400M/40M/4M
    Resolution: 4000M/250V, 1 Count/1K
    4000M/500V, 1 Count/1K
    4000M/1000V, 1 Count/1K
    Accuracy: 3% rdg + 5 Count (under 1G)
    5% rdg + 3 Count (under 4G)

    Features:
    • 4000 M/V Reading/10,000M analog indication
       
    • “Test Hold” function easy to catch up the value
       
    • Backlight illumination
       
    • 3-3/4 Digital LCD, 4000 Counts
       
    • Autorange for Mega Ohm range
       
    • 50 segments Log Scaled Analog Display
       
    • Easy to carry testing package
       
    • Tests insulation at rated voltage into a 1mA load
       
    • 200mA short circuit continuity current
       
    • Meet VDE 0413
       

    VDE 0413 / IEC 1010
    General Specifications:


    Display: 80 x 50mm Big LCD Panel with 50 segments analog display Max Reading 4000
    Over Range Indication: “OL” will be shown on the LCD Panel when out of range measurement is made
    Low Battery Indication: The will be shown when the battery needs to be changed
    Sampling Time: 2.5 times/sec Digital Display 10 times/sec Bargraph
    Power Source: Eight 1.5Volt AA size Battery
    Operating Temperature and Humidity: 0°C to 40°C (32°F to 104°F), below 80% RH
    Storage Temperature: -10°C to 60°C (14°F to 140°F)
    Dimensions: 200(L) x 140(W) x 95(H)mm
    Weight: Approx. 900g (with battery)
    Accessories: Test Lead, Battery, Instruction Manual

     

     

    Phase & Motor Rotation Meter

    MTP-8010

     

    Click image to enlarge - Phase Sequence Detector

     

    $130.80

    Features:
    • Three functions in one unit
      Including open phase, phase sequence and motor rotation indication.
       
    • Large size alligator clips
      Can easily hold terminals of switchboards.
       
    • Highly reliable.
      Identifies 3 phases sequence and open phase check.
       
    • Functional design
      This model is ideal for installing conveyor lines, pump systems and interconnected drivers.
    IEC801-3; EN61010-IZ
    EN50081-1, EN50082-1
    IEC-1010
    600V Cat. III

    Input voltage: 100V AC up to 600V AC max.

    Frequency range: 45 to 70Hz

    Circuit Structure: All electronic (not mechanical)

    Power Requirement: 006P DC 9V battery

    Power Consumption current approx.: 14mA of motor rotation filed tester
    AC power consumption approx. 7mA per phase rotation filed indicator

    Dimensions: 153mm(L) x 72mm(W) x 35mm(H)

    Weight: Approx. 182g battery included

    Accessories: Test leads (red, black & white), vinyl case, instruction manual

     

    Digital Tachometer

    Click image to enlarge - Tachometer
    MTP PS-700
    $895.00

    • Brightest flash of any strobe in it's class
       
    • Long run per charge time
       
    • User adjustable flash rates
       
    • Buttons for easy X2 and /2 adjustment
       
    • Phase shift mode for full inspection of gears and rolls
       
    • Alphanumeric LCD display with easy uder interface
       
    • One hand operation for right or left-handed operators
       
    • User adjustable flash ratesRemovable battery with built-in charge electronics
       
    • User adjustable flash ratesExternal trigger and clock output

    Click image to enlarge - Tachymиtre
    PROVA RM-1500 K
    $355.00

    • Digital tachometer with 5 digits LCD display
       
    • Optical and contact measurements
       
    • Max/min/hold and true average
       
    • Autorange RPM
       
    • Measures RPM, m/min, ft/min, yard/min

     

    RM-1500 (Optical & Contact)

    RM-1500-1 (Optical Only)

    RM-1501 (RS-232)

    RM-1502 (Contact adaptor)

    Click image to enlarge - Digital Tachometer

     

    RM-1500 PRICE: $334.80CAD

     

    RM-1500-1 PRICE: $240CAD

     

    RM-1501 PRICE: $399.60CAD

     

    RM-1501 PRICE: $138CAD

    General Specifications:

    Display: 5 digits 99999 counts
    Sampling Rate: 1sec ( >60rpm); >1sec ( <60rpm)
    Measuring Distance: 50 to 300mm
    Time Base: 4.0MHz Quartz Crystal
    Range Selection: Automatic
    Battery: Four 1.5V batteries (AA, UM-3)
    Power Consumption: 1.5mA (Idle) 5mA (1000.0~99999rpm) 25mA (10.00~999.99rpm)
    Auto Power Off: 30 minutes
    Operating Temp.: 0 to 50°C (32 to 122°F)
    Size: 172 x 63 x 36mm (6.8 x 2.5 x 1.5”)
    Weight: 190g (6.7oz) including battery
    Accessories: Carrying case, Reflective tape, Instruction manual

    Features:

    • 5 Digits LCD Display
       
    • Light Reflex Measuring
       
    • Range 10.0 to 99,999 RPM
       
    • Measuring Distance 50 to 300mm
       
    • Sampling Rate: 1 Second/Time
      (>60 RPM);
       
    • Combination type for non-contact and contact measurements
       
    • Counter (0-99999)
       
    • Both contact RPM measurement and circumferential velocity
      measurement in one simple
      adaptor
       
    • Max/Min/Hold
       
    • Autorange RPM
       
    • RS-232 (RM-1501)
       
    • Contact RPM and circumferential
      velocity measurements in one simple
      adaptor (RM-1502)
       

     

     

    Click image to enlarge - Automotive DMM
    MTP 1550
    $175.00

    • RPM measurement for automotive engines with 1 to 12 cylinders using the inductive pick-up
       
    • Oversize high contrast 4000 counts LCD display with backlight and bar graph
       
    • 14 functions including DCV, ACV, DCA, ACA, resistance, RPM(tach), dwell angle, duty cycle, pulse, period, frequence, capacitance, continuity and diode check
       
    • Read pulse, duty cycle and dwell angle for electronic fuel injection feedback carburators and ignition
       
    • Data hold and relative functions
       
    • Over range indication
       
    • Auto power off
       
    • Fused current inputs and overload projection on all ranges
       
    • Measures milliseconds pulse with to test on time of fuel injectors, idle air control motor and electronic transmission controls

    TES-1550

    Click image to enlarge - Automotive Multimeter

    PRICE: $240.00

    Features:

    • Engine RPM Measurement
       
    • Auto power off
       
    • Waterproof ABS housing
       

     

     
    EN61010-1
    1000V CAT III POLLUTION 2

    Tacho: 10~10,000 RPM
    Accuracy: ± (2% rdg + 1 dgt)
    Resolution: 10RPM

    Dwell
    Range: %/4CYL/6CYL/8CYL
    Accuracy: ±(2% rdg + 1 dgt)
    Resolution: 1% (1°)

    Voltage (DC/AC) (Autorange/Manual)
    Range: 400m/4/40/400/750V (AC)/1000V (DC)
    Accuracy: DC ± (0.5% rdg + 1 dgt)
    AC ± (1.2% rdg + 5 dgts)
    Resolution: 100µV

    OHMS (Resistance): (Autorange/Manual)
    Range: 400/4K/40K/400K/4M/40M
    Accuracy: ± (0.8% rdg + 3 dgts)
    ± (1.5% rdg + 5 dgts) for 40M Range

    Current (DC/AC) (Autorange/Manual)
    Range: 40m/400m/20A (DC/AC)
    Accuracy:
    DC ± (1.0% rdg + 1 dgt) for 40m/400mA ± (1.5% rdg + 2 dgts) for 20A
    AC ± (1.5% rdg + 3 dgts) for 40m/400mA ± (2.0% rdg + 5 dgts) for 20A
    Resolution: 10µA
    Continuity Beeper: 40
    Circuit Voltage: 0.5V

    Diode Test: ( )
    Accuracy: ± (1.0% + 2 dgts)

    Capacitance: (Autorange/Manual) Cx
    Range: 4n/40n/400n/4µ/40µF
    Accuracy: ± (1.5% rdg + 10 dgts)
    Resolution: 1pF

    Frequency (Autorange)
    Range: 100/1K/10K/100K/500KHz
    Accuracy: ± (0.1% rdg + 2 dgts)
    Resolution: 0.01Hz
    Sensitivity: 100mV/1V/10V

    Display:
    3-3/4 Digit LCD
    Maximum Reading 3999 with Bargraph
    Size & Weight:
    186mm(L) x 87mm(W) x 45mm(H) & 375g

    Accessories: Instruction Manual, Thermo Case TP-E06 & Test Leads, Holster Case

     

     

    Temperature & Humidity Meter


    MTP 1368
    $125.00

    • Fast Response Time %RH: 10S (90% at 25єC still air)
       
    • High accuracy
       
    • Dew Point Temperature
       
    • Wet Bulb Temperature
       
    • Resolution 0.01%RH, 0.01єC/0.01°F
       
    • Max Hold and Data Hold Function
       
    • Micro Processor-based Design
       
    • Dual Display Temperature & Humidity
       
    • Auto Power Off, Disable Sleep Mode
       
    • Backlight
       
    • Mini Size

    Click image to enlarge - Thermometer - K.J.E.T. Printing
    TES 1304
    $599.00


     

    • Type K.J.E.T. Thermocouple Input
       
    • Dual Channels with multi-functions (T1, T2 & T1-T2)
       
    • Real-time clock calendar & °C/°F Switch
       
    • 0.1% of reading high Accuracy & MAX/MIN/AVG Display
       
    • Built-in thermo printer with Time interval stting (1304)
       
    • RS-232 Datalogging Capacity (1305)

    Display: 4-1/2 LCD Digital Display
    Measurement Range:
    Type K: -200~1370°C (-328~2498°F)
    Type J: -200~760°C (-328~1400°F)
    Type E: -200~1000°C (-328~1832°F)
    Type T: -200~400°C (-328~752°F)
    Resolution: 0.1°C/0.2°F
    Input Protection: 60VDC/24Vrms
    Sampling Rate: 2 times/1 sec.
    Operating Temperature: 0~50°C / 32~122°F)
    Operating Humidity: 10~90% RH
    Storage Temperature: -10~+60°C (14~140°F),
    Storage Humidity: 10~75%RH
    Power Supply: 6 pcs size AAA Alkaline Battery / 9V~16V adaptor socket pin available PS-101
    Battery Life: About 50 hours
    (not including printer)
    Dimensions: 193(L) x 74(W) x 37(H)mm
    Weight: Approx. 365g (including batteries)
    Internal peripheral equipment:
    Thermo-printer
    Accessories: Carrying case, Instruction manual, Batteries, 2 Rolls thermo-paper

    Click image to enlarge - Pocket digital Thermometer
    MTP ST-9238B
    $24.95

    • 1” diameter pocket thermometer
       
    • Easy-to-read LCD numerals
       
    • Fahreinheit/Celsius switchable
       
    • Wide measurement range -58°
      to 302°F and -50° to 150° C
       
    • Accuracy: ± 2°F or ± 1°C
       
    • Display updates every one second

    Features:
    • 1” diameter pocket thermometer
       
    • Easy-to-read LCD numerals
       
    • Fahreinheit/Celsius switchable
       
    • Wide measurement range -58°
      to 302°F and -50° to 150° C
       
    • Accuracy: ± 2°F or ± 1°C
       
    • Display updates every one second
       
    • Powered by 1.5V watch battery,
      included. Free spare battery
       
    • 5” stainless steel stem
       
    • Immerse stem at least 1”
      for accurate reading
       
    • Handy nylon case with shirt
      pocket clip included
    Applications:
    • Food Service Processing
       
    • HVAC
       
    • Scientific and Laboratory
       
    • Transportation and Warehousing
       
    • Agriculture and Horticulture
       
    • Automative Service & repair
       
    • Equipment Maintenance
       
    • Household

    Click image to enlarge - Thermometer
    TES 1311
    $116.00

    • Type “K” Thermocouple Input
       
    • Autorange resolution 0.1 / 1°
       
    • With °C, °F & K switching
       
    • Offset (Relative) function
       
    • MAX / MIN / AVG with elapse time function
       
    • Data Hold Function
       
    • Room temperature compensated
       
    • Flip-up stand
       
    • Backlight LCD display

    Click image to enlarge - Thermometer
    TES 1312A
    $165.00

    • Type “K” Thermocouple Input
       
    • Autorange resolution 0.1 / 1°
       
    • With °C, °F & K switching
       
    • Offset (Relative) function
       
    • MAX / MIN / AVG with elapse time function
       
    • True average 8 hours reading
       
    • Data Hold Function
       
    • Watch Timer function
       
    • Room temperature compensated
       
    • T1 & T2 dual points display
       
    • T1 – T2 differential measurement
       
    • Flip-up stand
       
    • Backlight LCD display

    Click image to enlarge - Datalogging Thermometer
    TES 1316
    $375.00

    • Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type
       
    • Dual input function T1/T2 temperature display
       
    • 7500 Datalogging capacity
       
    • Warning beeper with TIME, MAX-MIN AVG, HOLD function
       
    • °C/°F/°K User-Selective
       
    • Backlight LCD display

    Click image to enlarge - RTD Thermometer
    TES 1317
    $155.00

    • Pt 3916/3926/385 RTD standard
       
    • 97 Data Logging capacity
       
    • Warning beeper with HI/LO setting
       
    • Time setting
       
    • MAX / MIN with TIME, MAX-MIN AVG Hold function
       
    • °C/°F/°K User-Selective
       
    • Back light LCD display

     

    Click image to enlarge - Infrared Thermometer
    TES 1326
    $135.00

    • °C/°F Selectable
       
    • Back-light LCD display
       
    • Laser targeting
       
    • Auto Hold function
       
    • Maximum/Minimum reading recorder function
       
    • Data memory and read function
       
    • Auto-power off

    Click image to enlarge - Infrared Thermometer
    TES 1327K
    $225.00

    • °C/°F Selectable
       
    • Back-light LCD display
       
    • Laser targeting
       
    • Adjustable emissivity and type K thermocouple input
       
    • Audible and visible alarm
       
    • Data memory and read fonction
       
    • For HVAC, plant maintenance, food industiy etc


    MTP 1328
    $295.00

    • °C/°F Selectable
       
    • High 50 to 1 distance target ratio, measures smaller surface areas at greater distance
       
    • Widest temperature range
       
    • Built-in laser pointer, high and low alarms
       
    • Automatic data hold, max, min DIF, AVG, record
       
    • Adjustable emissivity


     

    TES 1364
    Click image to enlarge - Digital Thermo Hygrometer
    $225.00

    • Detachable sensing probe.
       
    • Data Hold & Relative function.
       
    • Dual LCD display with Bargraph indication.
       
    • Datalogging capacity 10,100 dual reading. (%RH & Temp). (TES-1365)
       
    • Dew Point Range: -10C ~ 50C
       
    • RS-232 interface & Windows software. (TES-1365)
       
    • Wet Bulb Reading.
       
    • Automatic Timer Recording for Datalogger. (TES-1365)
       
    • MAX/MIN with Time Stamp.

    TES 1365
    Click image to enlarge - Data Logging Thermo Hygrometer
    $387.50

    • Detachable sensing probe.
       
    • Data Hold & Relative function.
       
    • Dual LCD display with Bargraph indication.
       
    • Datalogging capacity 10,100 dual reading. (%RH & Temp). (TES-1365)
       
    • Dew Point Range: -10C ~ 50C
       
    • RS-232 interface & windows software. (TES-1365)
       
    • Wet Bulb Reading.
       
    • Automatic Timer Recording for Datalogger. (TES-1365)
       
    • MAX/MIN with Time Stamp.

    MTP ST-171
    $95.00


    Moisture Meter

    MTP ST-125
    Click image to enlarge - Moisture Meter
    $89.00

    • Measures moisture level in sawn timber (also cardboard)
       
    • Display moisture level
       
    • Electrode length of 8mm

  • Included accessories: 3 x CR2032 batteries
  • pH Meter

    Click image to enlarge - Data Logging Thermo Hygrometer

    TES 1380
    • Fast and Easy pH measurement
       
    • Dual LCD display shows pH/°C&°F or mV/°C&°F simultaneously
       
    • Logging 99 readings


    $499.00

    Specifications

    Circuit: Custom one-chip of microprocessor LSI circuit
    Display: Super large LCD display
    Measurement
    pH: 0 to 14 pH
    mV: 0 to 600mV
    Temperature: 0 to 100°C, 32 to 212°F
    Input Impedance: 1012
    Temperature Compensation:
    Manual: 0 to 100°C, adjusting by push button on front panel
    For pH Range:
    Automatic: With the optional TEMP probe, 0 to 100°C
    Calibration For pH Range Built in SLOPE (pH 4) & Cal. (pH 7)
    Data Hold: To auto hold the reading values on display
    Memory Recall: Max 99 points
    Power off: Auto shut off 10 minutes saves battery life, or manual off by push button
    Over Input Indication Indication of “-- -- -- --”
    pH Electrode: Any combination pH electrode with BNC connector
    Operating Temperature: 0°C to 50°C (32°F to 122°F)
    Operating Humidity: Max 80% RH
    Sampling time: Approx. 0.18 second
    Power Supply: 006P DC 9V battery (Heavy duty type)
    Battery Life: 200 hours (approx.)
    Accessories: Carrying case, Instruction manual, Battery, pH electrode, Temperature probe, pH Standard Buffer Solution

    Receptacle Tester

    Click image to enlarge - GFI Receptacle Tester
    MTP 110
    $15.00

    • Detects faulty wiring in 3 wire receptacle
       
    • Light pattern indicates condition of wiring
       
    • Trips GFI receptacle to indicate receptacle is operational


     


    Email us if you have any questions.

    Place an order

    Back to the main page

    A1 Electronic Parts
    196 North Queen St.
    Toronto, Ontario
    M9C 4Y1
    Tel: (416) 255-0343
    Fax: (416) 255-4617