ISOLATION - STEP DOWN PLUG IN (115VAC - 95VAC)

Key Features:

• Primary 115VAC, 50/60 Hz., Secondary 95VAC.
• Provides circuit isolation.
• Electrostatic shield between primary & secondary.
• World wide applications, 50 or 60 Hz. operation, step down (115VAC to 95 VAC).
• Designed mainly for Japanese equipment in North America.
• Perfect for operating "Classic" equipment that can not tolerate todays higher line voltages (ie..125 VAC input will produce a stress free 105 VAC output at full load PLUS isolation and shielding).
• Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).
• Input (primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P)
• Output (secondary) connected to two standard - 3 wire grounded receptacles.
• Features include ventilated black steel case, rocker lighted on-off switch & fuse protected output.
• Remember - These units do NOT convert line frequency

Mechanical & Schematic Data:

Email us if you have any questions.

Place an order

Back to the main page