Air Flow/ Velocity/ Pressure

Prova AVM-03

• Air Velocity/Temperature Measurement
   
• Accurate & Sensitive
   
• Range: 0 ~ 45m/sec. 0 ~ 60°C
   
• Sensitive for low/high air velocity
   
• Ergonomic Design
   
• Detachable 52mm (diameter) Vane Head
   
• 2 meters coiled cable/back mounting screw for long extension
   
• Low Power Consumption (6mA)
   
• Data Hold Function
   
• Max hold for temperature

$275.00

• Displays 2 parameters simultaneously
   
• Air velocity, vane probe with integrated Pt100 temperature probe
   
• Automatic average
   
• Hold function, min/max values

VT-50

• Measures air flow with cones
   
• Pt100 temperature probe integrated into the hot wire probe
   
• Displays 2 parameters simultaneously
   
• Hold function, min/max values

• Non-corrosive dry gases, measuring units: kPa, inWg, mmH2O, mBar, mmHg
   
• Dysplays 2 parameters simultaneously, reliable and accurate
   
• Identifies positive, negative and differential pressure
   
• Min/max values

• 0 ~ 10,000 ppm range, Diffusion sampling mode
   
• Maintenance free of infrared sensing
   
• Continuous or manual datalogging and reading
   
• Data hold & Maximum / Minimum with Time stamp
   
• Alarm and Time setting
   
• Auto power OFF /ON / OFF setting
   
• Easy calibration in fresh air
   
• Simple and safe

• Up to 1000 ppm carbon monoxide meter
   
• Super large 3 1/2 gigits, multifunction, backlight LCD
   
• Pocket size and easy to use
   
• Max hold, data hold

Included accessories: 1 x 9V battery, carrying case

• Highly sensitive and reliable
   
• With the 16" detector, it's easy to measure hard to reach areas
   
• Pinpoints small leaks: detects all combustible gas leaks, even tiny leaks
   
• Easy to use, one hand operation
   
• Visible and audible alarm at 10% LEL for metane
   
• Used in contaminated environments, eliminates background gas concentration with fully adjustable tick rate
   
• Intermittant duty cycle
   
• Solid state relay sensor type

• Handheld natural gas leak detector
   
• Detects hydrocarbon and combustible fuel gases (methane, propane, butane, LPG, etc.)
   
• Accurate and highly sensitive, uses a new generation of solid state sensor
   
• Inaccessible points can be reached with the 8" long flexible probe
   
• Led scale and beeper to effectively pinpoint small leaks
   

• Detected gases are: CFC, HFC, HCFC as R12, R22, R134a and similars
   
• Easy to use, rugged, accurate, highly sensitive
   
• Points can be reaches with the 8" long flexible probe
   
• Uses a new generation of solid state sensor
   

• Personnal safety ambient CO monitor
   
• Measures upt to 500ppm of CO
   
• Highly sensitive and accte device
   
• Led scale and beeper to warn the user of the possible presence of carbon monoxide
   
• Supplied with a vinyl case and belt clip

• Measures 5 particle sizes simultaneously, displaying 2 channels
   
• Can log up to 500 datas and can be transferred to PC or printer
   
• Built-in flow sensor enables highly accurate measurement of particle concentration (0.1CFM 10%)
   
• Temp/RH and air velocity probes available as an option

• Displays 3 particle sizes simultaneously in cf or m3
   
• Logs up to 8000 datas that can be transferres to PC or printer
   
• Built-in flow sensor (0.1CFM 10%)
   
• Adjustable sampling time from 1 sec to 99 min 59 sec
   
• Ideal fit in the palm of your hand
   

• Large LCD 4-line display with automatic backlight
   
• 7" removable fuel gas probe
   
• Proprietary design water trap
   
• Draft & differential pressure meter
   
• Rechargeable battery or AC operation
   
• Stacks temperature
   
• Combustion efficiency
   
• Excess air
   
• Ambient temperature
   
• 10 Programmable fuels (pre-Set)
   
• Real clock including date
   
• Measures: O2, calculates CO2, CO sensor (0 to 4000ppm), ambient CO monitoring, CO/CO2 ratio

• Built-in compact printer and draft measurement
   
• TC type K mini-din connector for any temperature probe
   
• 7" removable fuel gas probe
   
• Easu to use with direct function keys
   
• Stacks temperature
   
• Combustion efficiency
   
• Excess air
   
• Ambient temperature
   
• 10 Programmable fuels (pre-Set)
   
• Real clock including date
   
• Measures: O2, calculates CO2, CO sensor (0 to 4000ppm), ambient CO monitoring, CO/CO2 ratio

• Built-in impact printer
   
• Draft & differential pressure meter with 10 programmable fuels (pre-set)
   
• Rechargeable battery or AC operation
   
• Ready for the future with upgradable internal software on flash memory
   
• 250 test memory/RS-232 interface/DBGAS 2000 Windows software
   
• Stacks temperature
   
• Combustion efficiency
   
• Excess air
   
• Ambient temperature
   
• 10 Programmable fuels (pre-Set)
   
• Real clock including date
   
• Measures: O2, calculates CO2, CO sensor (0 to 4000ppm), ambient CO monitoring, CO/CO2 ratio
   
• Special multifunction probe input capabilities
   
• 250 memory complete test
   
• Draft measurement
   
• Differential pressure
   
• Software

• 10 programmable fuels (pre-set) built-in printer
   
• Ambient CO monitoring using the internal sensor
   
• 250 test memory/RS-232 interface
   
• Multifunction probe input for ambient CO safety monitor, gas leak detector, ambient T+RH% measurement, flame rod current test
   
• Stacks temperature
   
• Combustion efficiency
   
• Excess air
   
• Ambient temperature
   
• 10 Programmable fuels (pre-Set)
   
• Real clock including date
   
• Measures: O2, calculates CO2, CO sensor (0 to 4000ppm), NO/NOX sensor ( 0 to 4000ppm)
   
• Special multifunction probe input capabilities
   
• 250 memory complete test
   
• Draft measurement
   
• Differential pressure
   
• Software
   
• Upgradable
   
• Optional functions: NO2, SO2, Low-NOx, CxHy