Electronic meters and measuring instruments

We stock many different kinds of electronic meters, measuring tools and instruments.

Click image to enlarge - Electronic Multimeter
MTP 2850
$99.00

  • 3999 counts large LCD display
     
  • True RMS
     
  • RS-232 pc interface
     
  • Temperature, capacitance, frequency and duty cycle measurements

Click image to enlarge - Digital Multimeter
TES 2712
$139.00

  • 3-1/2 LCD
     
  • Data-hold and Peak-hold function
     
  • Inductance, capacitance & ohm
    measurement
     
  • Two years warranty

Click image to enlarge - Electronic Multimeter
MTP 2325
$69.00

  • All-in one digital multimeter
     
  • Audible and visual indications
     
  • Over-molding rubber case
     
  • Ergonomic design

Click image to enlarge - Digital Multimeter
TES 2700
$129.00

  • Autoranging and Auto power off
     
  • 3200 count LCD with analog bargraph
     
  • Data-hold mode available at ohms
     
  • Overload protection up to 660Vrms
     
  • Two years warranty

Click image to enlarge - Electrical Multimeter
MTP2860
$189.00

  • DMM with a combination of precision, features, easy-to use, safety and reliability
     
  • Trus RMS AC voltage and current readings
     
  • Min/max recording
     
  • Peak recording as well as frequency and capacitance ranges
     
  • Full range protection
     
  • Water proof

Click image to enlarge - Dual Channel DMM
PROVA 903
$475.00

  • 60,000/60,000 Counts Dual Channels
     
  • Compare Voltage at two different Locations
     
  • Read Voltage and Current at the same time
     
  • Standalone Data Logging
     
  • Optical Isolated RS-232C ASCII Interface
     
  • True RMS
     
  • The New Standard of DMM

 


MODEL

TES-2620



Price: $272.99

  • 3-3/4 Digital LCD with bar-graph
  • Waterproof ABS housing
  • Auto-power off
  • 2 years warranty
  • Ohms, Diode Audible continuity, Capacitance input, Overload protection to 600 Vrms

  • TES-2620

    True RMS Multimeter


    Specifications


    IEC 1010

    1000V CAT III POLLUTION 2


    Voltage (AC/DC):

    Range: 400m/4/40/400/750V (AC)/1000V (DC)

    Accuracy: DC - 0.5% rdg + dgt | AC - 1.2% rdg + 5 dgts

    Resolution: 0.1 µVolts

    Overload Protection: 1100VDC & 800VAC

    Current (AC/DC)

    Range: 4m/40m/400m/20A (DC/AC)

    Accuracy: DC - 1% rdg + 1 dgt | AC - 1.5% rdg + 5 dgts

    Resolution: 1µA

    Overload Protection: 0.5A/250V fuse & Diode (AC/DC)

    Continuity Beeper:

    Operation Resistance -below 40Ω

    Max open circuit voltage: 0.5V

    Max open circuit voltage: 3V

    Ohms (Resistance):

    Range: 400/4K/40K/400K/4M/40MΩ

    Accuracy: 0.75% rdg + 3 dgts

    Resolution: 100mΩ

    Overload Protection: 600Vrms

    Open Circuit Voltage: < Below 0.5V

    Frequency (Hz):

    Range: 100/1K/10K/100K/500KHz

    Accuracy: 0.1% rdg + 2 dgts

    Resolution: 0.01Hz

    Sensitivity: 100mV/1V/10V

    Sampling Rate:

    20 times/sec for Bar-graph indication

    2 times/sec for digital display

    Accessories:Test leads, Spare fuse, Battery, Insuruction manual, Holster case

    Optional Accessories: Carrying case


    MODEL

    TES-2804



    Price: $454.99

  • 50,000 Counts True RMS Reading
  • Capacitance check (500nF-500µF)
  • 15,000 Datalogging Capacity
  • RS-232 Interface (Software Included)
  • Back Light Illumination

  • TES-2804

    High Accuracy Autoranging Multimeter (RS-232)


    Specifications

    IEC 1010

    1000V CAT III 600V


    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500mV

    10µV

    0.09% rdg + 5 dgts

    = 10MΩ

    660Vrms


    DC Voltage (Autorange & Manual range)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    0.5V

    0.1 mV

    0.09% rdg + 5 dgts

    = 10MΩ

    660Vrms

    5V

    0.1mV

    50V

    10mV

    500V

    100mV

    600V

    100mV


    AC Voltage (Autorange & Manual range)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    5V

    0.1 mV

    0.09% rdg + 20 dgts

    = 10MΩ

    660Vrms

    50V

    10mV

    500V

    100mV

    600V

    100mV


    Frequency (Hz) (Autorange)

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500Hz

    0.01KHz

    0% rdg + 40 dgts

    200mV

    660Vrms

    5KHz

    0.1Hz

    50KHz

    1Hz

    500KHz

    10Hz

    400mV

    5MHz

    100Hz

    1V


    Audible Continuity

    Range

    Resolution

    Open Circuit Voltage

    Continuity Beeper

    Overload Protection

    •))

    0.01Ω

    = 3V

    ≤ Approx. 40Ω

    660Vrms


    Resistance

    Range

    Resolution

    Accuracy

    Input Impedence

    Overload Protection

    500Ω

    0.01Ω

    0.3% rdg + 10 dgts

    3V

    660Vrms

    5KΩ

    0.1Ω

    50KΩ

    500KΩ

    10Ω

    5MΩ

    100Ω

    0.9% rdg + 20 dgts

    50MΩ

    1KΩ

    2% rdg + 20 dgts


    Diode Test

    Range

    Resolution

    Short Circuit Current

    Open Circuit Voltage

    Overload Protection

    0.1mV

    0.8mA typical

    3V

    660Vrms


    Capacitance (F)

    Range

    Resolution

    Accuracy

    Overload Protection

    500nF

    100pF

    0.09% rdg + 20 dgts

    660Vrms

    5µF

    1nF

    50µF

    10nF

    500µF

    100nF


    AC Current (Manual range & Autorange)

    Range

    Resolution

    Accuracy

    Overload Protection

    5000µA

    0.1µA

    0.09% rdg + 20 dgts

    0.5A/600V

    500mA

    0.01mA

    10A

    1mA

    20A/600V


    DC Current (Manual range & Autorange)

    Range

    Resolution

    Accuracy

    Overload Protection

    5000µA

    0.1µA

    0.5% rdg + 20 dgts

    0.5A/600V

    500mA

    0.01mA

    10A

    1mA

    20A/600V


    MODEL

    TES-2802



    Price: $523.99

    TES-2802

    Auto Range Datalogger Multimeter (RS-232)


    Specifications


    IEC 1010

    CAT III 600V


  • Inductance Measurement (40mH ~ 40H)
  • Capacitance Measurement (40nF ~ 40µF)
  • Temperature Measurement (-50C ~ 1300C, -58F ~ 1900F)
  • Data logger function. (Memory: 16000 records)
  • True RMS V, A
  • Also provides MAX/MIN REL and data HOLD mode.
  • DMM talks with PC via RS-232 interface
  • AUTO-power off
  • AUTO-Ranging on Volt, Ohm, Frequency
  • 3-3/4 Digital LCD with bar-graph
  • Back Light

  • MODEL

    TES-2800/2801



    Price:

    2800: $232.99

    2801: $232.99


  • DMM talks with PC via RS-232 interface
  • Data Logger function 12K Memory (2802)
  • Direct input of V, A, Ohm, Hz, Cx and degrees C/F without any further signal modification
  • Two year warranty
  •  


    MODEL

    TES-2700



    Price: $121.99


  • Autoranging and Auto-power off
  • 3200 count LCD with analog bar-graph
  • Data-hold mode available at ohms
  • Overload protection up to 660Vrms
  • Two years warranty
  • TES-2700

    Multimeter (RS-232)


    Specifications


    IEC 1010

    CAT II 600V POLLUTION 2


    Voltage (AC/DC)

    Range: 320m/3.2/32/600VDC, 3.2/32/320/600VAC

    Accuracy: DC - 0.5% rdg + 2 dgts, AC - 1.2% rdg + 4 dgts in 40~400Hz

    Resolution: 100µV(DC)/1mV(AC)

    Input Impedence: 10Mω(DC)

    Overload protection: 660VAC

    Current (AC/DC)

    Range: 320µ/3.2m/32m/320m/20A

    Accuracy: DC - 1% rdg + 2 dgts, AC - 1.5% rdg + 5 dgts (40~400Hz)

    Resolution: 0.1µA

    Resistance

    Range: 320/3.2K/32K/320K/3.2M/30Mω

    Accuracy: 0.8% rdg + 2 dgts

    Resolution: 0.1ω


    MODEL

    TES-2712 LCR



    Price: $126.99


  • 3 1/2" LCD
  • Data-hold and Peak-hold function
  • Inductance, capacitance and ohm measurement
  • Two years warranty
  • TES-2712

    Multimeter (RS-232)


    Specifications


    IEC 1010

    CAT II 600V POLLUTION 2


    Voltage (AC/DC)

    Range: 200m/2/20/200/600VDC/600VAC

    Accuracy: DC - 0.5% rdg + 1 dgts, AC - 1% rdg + 5 dgts

    Input Impedence: 10Mω(DC)

    Current (AC/DC)

    Range: 200µ/2m/20m/200m/20A

    Accuracy: DC - 1% rdg + 1 dgt, AC - 1.2% rdg + 3 dgts (50~500Hz)

    Resolution: 0.1µA

    Inductance

    Range: 20m/200m/2/20H

    Accuracy: 5% rdg + 10 dgts

    Resolution: 10µH

    Capacitance

    Range: 2000P/200n/2µ/20µF

    Accuracy: 3% rdg + 10 dgts

    Resolution: 1PF

    Accessories

    Test leads, Spare Fuse, Battery, Operation Instruction, Optional rubber holster


    MODEL

    MTP-2321



    Price: $54.99


  • 30(h) x 60(w)mm Digital LCD
  • Transistor test
  • Fuse Protected
  • Audible diode test
  • MODEL

    MTP-2322



    Price: $90.99


  • 30(h) x 60(w)mm Digital LCD
  • Auto-power off
  • Frequency, Capacitance and Temperature Measurement
  • Transistor test
  • Fuse Protected
  • Audible diode test
  • MTP-2321 and MTP-2322

    Economical Digital Multimeter


    General Specifications (2321-2322):

    Numerical Display: 30(w) x 60(h)mm digital crystal display (LCD) maximum reading 3999

    Over range: LCD will show a "1"

    Indication Low Battery: "BT" is displayed when battery voltage drops below operating voltage

    Sampling rate: 2-3 times/sec.

    Measuring Method: Dual-slope integration A/D converter

    Power source: One 006p 9V or IEC 6F22 or NEDA 1604 battery

    Polarity: Automatic polarity "=" display for negative input


    MODEL

    MTP-1010



    Price: $18.99


    MTP-1010

    Pocket size (DMM)


    Features:

    POCKET SIZE DDM

    DC Voltage 2V +/- 0.5%, 20/200/500V +/- 0.8%

    AC Voltage: 200/500V +/- 1.2%

    DC Current: 200mA +/- 1.5%

    Resistance: 2K/20K/200K/2Mω +/- 1.0%

    Continuity checking with buzzer

    Diode test

    Power cource: 12V GP23A x 1

    Size/Weight: 70x120x18mm x 110g (including battery)

    MODEL

    MTP-1020



    Price: $36.99


    MTP-1020

    Auto-Range (DMM)


    Features:

    POCKET SIZE DDM

    Auto-power off

    Display: 14x35mm LCD, max reading 3999 counts

    Autoranging on all functions

    DC Voltage 4V +/- 0.5%, 40/400/600V +/- 0.8%

    AC Voltage: 4/40/400/600V +/- 1.2%

    DC Current: 40/400mA +/- 2.0%

    AC Current: 40/400mA +/- 3.5%

    Resistance: 400/4K/40K/400K/4Mω +/- 1.5% 40Mω +/- 3.0%

    Continuity checking with buzzer

    Diode test

    Power cource: 1.5V LR44 x 2

    Size/Weight: 70x120x18mm x 110g (including battery)


    MODEL

    TES-310 (20ω/V)



    Price: $53.99


    TES-310

    Analog Multimeter


    Specifications


    Voltage (AC/DC)

    Range: DC 0/0.25/2.5/10/25/50/250/1000V

    Input Impedence: 20Kω/V (DC)

    Range: AC 0/10/50/250/1000V

    Input Impedence: 9Kω/VAC

    Accuracy:

    DC Voltage: +/- 3% f.s.

    AC Voltage: +/- 4% f.s.

    AC/DC current: +/- 3% f.s.

    Ohms: +/- 3% of scale length

    AF output (dB): -10 to 22dB

    Overload Protection: 0.5A/250V Fuse and Diode

    Temperature: -30C to 200C (TP-R04)

    Current (AC/DC)

    Range: DC 0/50µ/25m/250m/10A

    Voltage Drop: 250mV

    Ohm

    Range: x1, x100, x1K, x10K

    Power: 1pc of 9V 006P 2pcs of AA batteries, 1.5V


    MODEL

    MTP Volt Stick®



    Price: $24.99


    Range: 90 - 660VAC

    Volt Stick® is an instrument for safety checking the presence of an AC voltage in cables, wall sockets, fuses, circuit breakers, junction boxes, etc.

    No current flow is needed for correct operation of the Volt Stick®.

    When a voltage is detected, a red indicator in the plastic tip of the Volt Stick® illuminates.

    m # 001

    MODEL

    Magnet Stick®



    Price: $34.99


    Solenoid tester

    Detects presence of AC, DC or permanent magnetic field.

    Sensitivity: 300 Gauss

    Test magnet included

    Power Supply: 2 x AAA (LR03) batteries supplied

    Weight: 60gr including batteries

    Working temperature: -20 to +50C

    Material: Aluminum, PP COP

    m # 002


    MODEL

    MTP-1030



    Price: $45.99


  • LED bar-graph display
  • Automatic polarity indication and automatic AC/DC voltage measurement selection
  • AC/DC voltage measurement up to 690V
  • Frequency range AC Voltage measurement from 0Hz up to 60Hz
  • Acoustic single pole voltage measurement (691 LED voltage and continuity tester)
  • Overload protection, no battery needed (even for continuity test)
  • Supplied complete with protective case
  • MTP-1030

    LED Voltage and Continuity Tester


    Specifications


    IP50

    IEC 1010-1 CAT III 700V POLLUTION 2 DIN VDE 0680-5


    Display:

    Polarity Indication:

    Single Pole Voltage Range:

    Frequency Range:

    Continuity Range:

    Internal Energy Storage:

    Charge Time:

    Standby:

    Test Duration:

    Internal Load:

    Test Current:

    Peak Current:

    8 LED (12, 24, 50, 120, 230, 400, 690V, Polarity)

    Automatic

    100 - 690V w/acoustic signal

    0 - 60Hz

    0 - 800kω

    Yes

    Approx. 5s/230V

    Approx. 30 min.

    Approx. 1 min.

    Approx. 1.3W / 230V

    < 3.5mA

    < 0.25A

          

     

    TES-3070 AC/DC Clamp Meter

    PRICE: $150.00

     

    Features:

    • 4000 Count Reading
       
    • Auto Reading for Hz Measurement
       
    • Data Hold / Peak Hold
       
    • AC 600A

     

    IEC 1010
    CAT III POLLUTION 2 600V
    A: General Measurement
    Voltage (AC/DC)

    Range: DC - 600V
    AC - 400V/600V
    Accuracy: DC - 0.75% rdg + 2 dgts
    AC - 1.2% rdg + 5 dgts
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Ohms (Resistance)
    Range: 4K
    Accuracy: 1% rdg + 5 dgts
    Resolution: 0.001K
    Overload Protection: 660Vrms
    Max Open Circuit Voltage: 0.5VDC
    Current (DC/AC) DC for TES-3080, 3082
    Range: 400/600A
    Accuracy: 2% rdg + 5 dgts
    Resolution: 0.1/1A
    Overload Protection: 800A
    Frequency (Hz)
    Range: 4KHz/20KHz
    Accuracy: 0.5% rdg + 5 dgts
    Resolution: 0.1Hz/1Hz
    Max Input Sensitivity: 5A/1V
    Overload Protection: 800A/750V
    Audible Continuity
    Continuity beeper below 40
    Max Open Circuit Voltage: 3.2V
    Overload Protection: 660Vrms
    Diode Test
    Resolution: 0.001V
    Accuracy: 1% rdg + 2 dgts
    Overload Protection: 660Vrms
    B: Peak Hold Measurement
    Current (AC)

    Range: 400/600A
    Accuracy: 2% rdg + 10 dgts
    Resolution: 0.1A/1A
    Overload Protection: 800A
    Voltage (AC)
    Range: 400/600V
    Accuracy: 1.5% rdg + 10 dgts
    Resolution: 0.1V/1V
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Capacitance (F) for TES-3073
    Range: 0~2000F
    Resolution: 1F
    Accuracy: (3% + 5)
    Test Frequemty: 2Hz
    Temperature (K Type) for TES-3073
    Range: -50C~1000C / -50F~2000F
    Resolution: 1C / 1F
    Accuracy: (2% + 2C)
    (3% + 4F)
    Accessories
    Carrying Case, Instruction Manual,
    Safety Test Leads, Battery,
    Temperature Probe (3073 only)

    TES-3080 AC/DC Clamp Meter

    PRICE: $198.00

     

    Features:

    • 4000 Count Reading
       
    • AC/DC 600A
       
    • DCA One-touch-Zero
       
    • Data Hold / Peak Hold
       
    • Auto Power Off
       
    IEC 1010
    CAT III POLLUTION 2 600V
    A: General Measurement
    Voltage (AC/DC)

    Range: DC - 600V
    AC - 400V/600V
    Accuracy: DC - 0.75% rdg + 2 dgts
    AC - 1.2% rdg + 5 dgts
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Ohms (Resistance)
    Range: 4K
    Accuracy: 1% rdg + 5 dgts
    Resolution: 0.001K
    Overload Protection: 660Vrms
    Max Open Circuit Voltage: 0.5VDC
    Current (DC/AC) DC for TES-3080, 3082
    Range: 400/600A
    Accuracy: 2% rdg + 5 dgts
    Resolution: 0.1/1A
    Overload Protection: 800A
    Frequency (Hz)
    Range: 4KHz/20KHz
    Accuracy: 0.5% rdg + 5 dgts
    Resolution: 0.1Hz/1Hz
    Max Input Sensitivity: 5A/1V
    Overload Protection: 800A/750V
    Audible Continuity
    Continuity beeper below 40
    Max Open Circuit Voltage: 3.2V
    Overload Protection: 660Vrms
    Diode Test
    Resolution: 0.001V
    Accuracy: 1% rdg + 2 dgts
    Overload Protection: 660Vrms
    B: Peak Hold Measurement
    Current (AC)

    Range: 400/600A
    Accuracy: 2% rdg + 10 dgts
    Resolution: 0.1A/1A
    Overload Protection: 800A
    Voltage (AC)
    Range: 400/600V
    Accuracy: 1.5% rdg + 10 dgts
    Resolution: 0.1V/1V
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Capacitance (F) for TES-3073
    Range: 0~2000F
    Resolution: 1F
    Accuracy: (3% + 5)
    Test Frequemty: 2Hz
    Temperature (K Type) for TES-3073
    Range: -50C~1000C / -50F~2000F
    Resolution: 1C / 1F
    Accuracy: (2% + 2C)
    (3% + 4F)
    Accessories
    Carrying Case, Instruction Manual,
    Safety Test Leads, Battery,
    Temperature Probe (3073 only)

    TES-3082 AC/DC Clamp Meter

    PRICE: $150.00

     

    Features:

    • True RMS Reading
       
    • 4000 Count Reading
       
    • AC/DC 600A
       
    • DCA One-touch-Zero
       
    • Auto Power Off
       
    IEC 1010
    CAT III POLLUTION 2 600V
    A: General Measurement
    Voltage (AC/DC)

    Range: DC - 600V
    AC - 400V/600V
    Accuracy: DC - 0.75% rdg + 2 dgts
    AC - 1.2% rdg + 5 dgts
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Ohms (Resistance)
    Range: 4K
    Accuracy: 1% rdg + 5 dgts
    Resolution: 0.001K
    Overload Protection: 660Vrms
    Max Open Circuit Voltage: 0.5VDC
    Current (DC/AC) DC for TES-3080, 3082
    Range: 400/600A
    Accuracy: 2% rdg + 5 dgts
    Resolution: 0.1/1A
    Overload Protection: 800A
    Frequency (Hz)
    Range: 4KHz/20KHz
    Accuracy: 0.5% rdg + 5 dgts
    Resolution: 0.1Hz/1Hz
    Max Input Sensitivity: 5A/1V
    Overload Protection: 800A/750V
    Audible Continuity
    Continuity beeper below 40
    Max Open Circuit Voltage: 3.2V
    Overload Protection: 660Vrms
    Diode Test
    Resolution: 0.001V
    Accuracy: 1% rdg + 2 dgts
    Overload Protection: 660Vrms
    B: Peak Hold Measurement
    Current (AC)

    Range: 400/600A
    Accuracy: 2% rdg + 10 dgts
    Resolution: 0.1A/1A
    Overload Protection: 800A
    Voltage (AC)
    Range: 400/600V
    Accuracy: 1.5% rdg + 10 dgts
    Resolution: 0.1V/1V
    Input Impedance: 10M
    Overload Protection: DC 1000V & AC 750V
    Capacitance (F) for TES-3073
    Range: 0~2000F
    Resolution: 1F
    Accuracy: (3% + 5)
    Test Frequemty: 2Hz
    Temperature (K Type) for TES-3073
    Range: -50C~1000C / -50F~2000F
    Resolution: 1C / 1F
    Accuracy: (2% + 2C)
    (3% + 4F)
    Accessories
    Carrying Case, Instruction Manual,
    Safety Test Leads, Battery,
    Temperature Probe (3073 only)
  •          

    TES-3040  Digital Clamp-on Meter

                    PRICE: 158.40

                                                                

    Numerical Display: 3-3/4 digits liquid crystal display (LCD) maximum

    reading 3999

    Over Range Indication: LCD will show an "OL"
    Sampling Rate: 20 times/sec (Bar-Graph) 2 times/sec (Digital Display)
    Power Source: One 006p 9V or IEC 6F22 or NEDA 1604 Battery
    Battery Life:  300hr approx.
    Polarity: Automatic polarity
    Auto Power off time: Approx. 30 minutes negative input
    Operating Temperature 0C to 40C
    and Humidity:  (32F to 104F) below 80% RH
    Storage Temperature -10C to 60C
    and Humidity:  (14F  to 140F ) below 70% RH.
    Dimensions:  239(L) x 66 (W) x 34(H) mm
    Weight:  Approx. 365g
    Jaw Opening: 46mm
    Ordering information:  TES-3040

                                   DC Voltage (Autorange & Manual)

    Range:  400mmV/4V/40V/400V/600V
    Resolution: 0.1mV/0.001V/0.01V/0.1V/1V
    Accuracy: 0.75% rdg+2 dgts
    Overload Protection: 660Vrms

                                  AC Voltage (Autorange & Manual)

    Range:  4V/40V/400V/600V
    Resolution: 0.001V/0.01V/0.1V/1V
    Accuracy: 1.2% rdg +5 dgts/ 1.5% rdg +5 dgts
    Overload Protection:  660Vrms
    Resolution: 0.001V/0.01V/0.1V/1V
    Frequency Response:  40-450Hz

                                     AC Current (Autorange & Manual)

    Range:

     400A/1000A

    Resolution:  0.1A/1A
    Accuracy:   % rdg +5 dgts.
    Overload Protection: 1100A
    Frequency Response:  40-450Hz
                                    Frequency (Hz) (Autorange only)
    Range:   100Hz/1KHz/10KHz/100KHz/1000KHz
    Resolution:   0/01Hz/0.1Hz/0.001KHz/0.01KHz/0.1KHz
    Accuracy: 0.5 rdg + 2 dgts
    Sensitivity:  100mV or 1A
    Overload Protection: 1100A/600Vrms
                             Resistance (Ω) (Autorange & Manual)
    Range:

     400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ

    Resolution:  0.1Ω/0.001KΩ/0.01KΩ/0.1KΩ/0.001MΩ/0.01MΩ
    Accuracy:

    1% rdg +2 dgts        1.5% rdg +2 dgts

    Overload Protection: 600Vrms
    Accessories Carrying Case, Instruction Manual, Safety Test Leads,

    Battery

     

       

                          TES-3050 AC/DC  Digital Clamp-on Meter

                                    PRICE: $303.32 

     

     

    Numerical Display: 3-3/4 digits liquid crystal display (LCD) maximum reading

     3999

    Over Range Indication:  LCD will show an "OL"
    Sampling Rate: 20 times/sec (Bar-Graph) 2 times/sec (Digital Display)
    Power Source: One 006p 9V or IEC 6F22 or NEDA 1604 Battery
    Battery Life: 30hr approx.
    Polarity: Automatic polarity
    Auto Power off time: Approx. 30 minutes
    Operating Temperature 0C to 40C
    and Humidity: (32F to 104F) below 80% RH
    Storage Temperature -10C to 60C
    and Humidity: (14F  to 140F ) below 70% RH.
    Dimensions: 239(L) x 66 (W) x 34(H) mm
    Weight: Approx. 365g
    Jaw Opening: 46mm
    Ordering information: TES-3050

                                   DC Voltage (Autorange & Manual)

    Range:  400mmV/4V/40V/400V/600V
    Resolution:  0.1mV/0.001V/0.01V/0.1V/1V
    Accuracy:   0.75% rdg+2 dgts
    Overload Protection: 660Vrms

                                 DC Current (Autorange & Manual)

    Range: 400A/1000A
    Resolution: 0.1mA/1A
    Accuracy: 2% rdg +25 dgts.
    Overload Protection: 1100A

                                AC Voltage (Autorange & Manual)

    Range:  4V/40V/400V/600V
    Resolution:  0.001V/0.01V/0.1V/1V
    Accuracy: 1.2% rdg +5 dgts/ 1.5% rdg +5 dgts
    Overload Protection: 660Vrms

    Frequency Response:

     40-450Hz
                               Frequency (Hz) (Autorange only)
    Range: 100Hz/1KHz/10KHz/100KHz/1000KHz
    Resolution: 0.01Hz/0.1Hz/0.001KHz/0.01KHz/0.1KHz
    Accuracy: 0.5 rdg + 2 dgts
    Overload Protection: 1100A/600Vrms

    Sensitivity:

    100mV or 1A
                              Resistance (Ω) (Autorange & Manual)
    Range: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ
    Resolution: 0.1Ω/0.001KΩ/0.01KΩ/0.1KΩ/0.001MΩ/0.01MΩ
    Accuracy: 1% rdg +2 dgts     1.5% rdg +2 dgts
    Overload Protection:  600Vrms
    Accessories: Carrying Case, Instruction Manual,

    Safety Test Leads, Battery

  • TES-3079 HVAC

    Digital Clamp-on Meter 

    Price: $283.46

    Specifications

          (In Stock)

    CAT III 600V POLLUTION 2

     

    Phase Angle 
    Range Resolution  Accuracy Overload Protection
    -45~ 0 ~ 45    0.1  3.0 ACV>100V, ACA>1

    Temperature (K-Type thermocouple)
    Range Resolution Accuracy Overload Protection
    -50C to 900C 0.1C  1% 1C 30VAC or 60VDC
    -58F to 1000F 0.1F  1% 2F

    Resistance (continuity <40Ω on the 999.9Ω range)
    Range Resolution Accuracy Overload Protection
    999.9Ω 100mΩ 1% 10dgts       600V
    9.999KΩ
    99.99Ω 10Ω
    999.9KΩ 100Ω
    9.999MΩ 1KΩ 5% 10dgts
    99.99MΩ 10KΩ

    Frequency
    Range Resolution Accuracy Overload Protection
    40Hz/1KHz 0.1Hz 0.5%rgd2dgts ACV>.2V,ACA>6A

    AC Current (50Hz to 400Hz) : Trms
    Range Resolution Accuracy   Overload Protection
    99.99A 10mA 2% 20dgts      1000A
    999.99A 100mA 4% 20dgts

    A TRMS: (AC+DC) (Burden Voltage: 5mV/A
    Range Resolution Accuracy   Overload Protection
    99.99A 10nA 1% 20dgts               600V
    999.9A 100nA 1% 20dgts

    Capacitance
    Range Resolution Accuracy   Overload Protection
    10.000F 1nF 1.5% 5dgts            600V
    100.00F 10nF
    1000.0F 100nF 2.5% 15dgts
    7000F 1F

    Apparent Power
    Range Resolution Accuracy  Overload Protection
    60.00KVA 10VA 2.5rdg 20dgts 600VAC/1000AAC
    600.0KVA 100VA 2.5rdg 20dgts

    DC Voltage
    Range Resolution Accuracy  Overload Protection
    999.9mV 0.1mV    
    9.999V 1mV   1% 20dgts        600V
    99.99V 10mV
    600.0V 100M

    AC Voltage (50Hz to 400Hz) : Trms
    Range Resolution Accuracy  Overload Protection
    999.9mV 0.1mV  1% 20dgts(50-60Hz)

     1% 20dgts (40-100Hz)

          600V
    9.999V 1mV
    99.99V 10mV
    600.0V 100mV

    Accessories

    Carrying case, instruction manual, batteries, test probe, temperature probe.

         Line Splitter    

    MTP LS-100                      

     

    PRICE: $18.0

    (In Stock)

    Features:

    Line splitter for most clamp-ons eliminates the need to split electrical cords or open electrical boxes for current measurements on 120 V lines.

     

    TES-500 Digital Clamp-on Meter

    Price: $69.12

     

     

    Features:

    • No residual magnetism among each current measurements
       

    • Accurate for 50Hz & 60Hz current measurement
       

    • Safety test lead jack avoids any electrical shock
       

    • No separate attachment required for ohm test
       

    • Convenient temperature test range
       

    AC current: 0-6A, 15A, 60A, 150A, 300A, 600A
    AC voltage: 0-150V, 300V, 600V
    Resistance: 0-2K (Mid-scale 40 ohm) 0-200K (Mid-scale 4K ohm)
    Temperature: -50C to +200C
    Frequency: 50/60Hz
    Jaw capacity: 40mm
    Accuracy: ACA 3% of F.S.
    ACAV 3% of F.S.
    Ohm 3% of Scale length
    Temp. 3% of Scale length
    Power source: AA 1.5V x 1
    Fuse: 0.5A 250V, 5 x 20mm fast blow
    Size & Weight: 198 x 84 x 15mm 380g Approx.
    Accessories:
    * Carrying case, Instruction manual & Safety test leads
    Optional Accessories: TP-R01 temperature probe

     

    Leakage Current Tester

     

    PROVA CM-03

     

     

    PRICE: $288.00

     

    Accessories:
    Carrying Case, Instruction Manual, Safety Test Leads, Battery

    Features:

    • AC 10A Resolution
    • 30mm Conductor Diameter
    • ACA 5 Ranges (40mA, 400mA, 4A, 40A, 100A)
    • 10A Ultra High Resolution

    • Wide Frequency Response 40Hz-1KHz
    • ACA, AVC, , and Continuity
    • Large 3-3/4 digits LCD (4000 counts)
    • Fast Bar-Graph Display (20 times/sec.)
    • Data Hold and Max/Min Hold
    • Relative Measurement
    • 600Vrms Overload Protection
      for Ohm Measurement
    • Power source: 2 x 1.5V SUM-3 battery
    • Operation Temperature:
      2-10C 50C at 85% max. relative

     

    Power AC/DC Clamp Meter

     

     

    TES-3063

     

     

    PRICE: $718.80

     

     

     

     

     

     

     

     

     

     

     

     

    Email us if you have any questions.

    Place an order

    Back to the main page

    A1 Electronic Parts
    196 North Queen St.
    Toronto, Ontario
    M9C 4Y1
    Tel: (416) 255-0343
    Fax: (416) 255-4617

    Features:

      • RS-232 Interface to talk with PC
         
      • 4 digits with dual Display LCD
         
      • Amp/Voltage Frequency Measurement
         
      • Dual display KW + FP, KVA + PF, V+A
         
      • 4000 Continuity Point Data Logger, 25 point manual Data Logger
         
      • True Power / Apparent Power / Power Factor Measurement
         
      • True RMS. V, A, W, cap, Ind, phase indicator
         
      • MIN / MAX Measurement
         
      • PEAK HOLD Detector
         
      • Dual display A + Hz , V + Hz
         

     

    POWER ANALYZER

    WM-01/WM-02

    WM-01 PRICE: $890.00

     

    WM-02 PRICE: $1150.00

     

    WM-02 1012 Points data-logging capacity PF (Direct Calculation from W, V, A)
    PF= Watt/(V*A)

    Frequency (Sensitivity 5V)
    Range: 2K/20K/200K/2M/20MHz
    Accuracy: 0.5% of rdg 2 dgts
    Resolution: 1Hz-10KHz
    Numerical Display: 3-1/2 digits LCD
    Over Range Indication: OL on LCD
    Sampling Rate: 2.5 times/sec.
    Power Source: Eight 1.5V AA batteries
    Power Consumption: 22mA approx.
    Operating Temperature: 0~40C
    Operating Humidity: Less than 80%
    Dimension: 352mm (L) x 300mm(W) x 100mm(H) 13.9(L) x 11.8(W) x 3.9(H)
    Weight: 1.637Kg (approx.) 3.6 lbs 9Approx.)

    Accessories included: Carrying Case, Instruction Manual, Safety Test Lead, Battery, AC Adaptor, Software, RS 232 Cable
    Features:
    • 4 LCD Displays with W, PF, V, A
       
    • Easy Plug-in and Test
       
    • RS-232 Computer Interface
       

    From Software you could also observe:
     

    • Phase Angle
       
    • Apparent Power
       
    • Reactive Power
       
    • Kilowatt Hour
       
    • Estimated kilowatt per day/month/year
       
    • Energy Cost/KW/h.
       
    • Serial Number/record print
      out of your appliance measured



    Watt (Autorange, AC + DC)
    Range: 2000
    Accuracy: 0.9% of rdg 4 dgts
    Resolution: 0.1W
    Input: 0-300V, 0-20A, 0-400Hz,
    PF = 0-1

    Voltage (True RMS, Autorange,
    AC + DC)

    Range: 750
    Accuracy: 0.5% of rdg 3 dgts
    Resolution: 0.1V
    Overload Protection: 1000VDC/750VAC

    Currect (True RMS, AC + DC)
    Range: 20A
    Accuracy: 0.5% of rdg 3 dgts
    Resolution: 0.01
    Overload Protection: 20A, fused


     
    TES 3600
    • 4 Current Clamp Probes
       
    • True RMS Sensing
       
    • Datalogger (512 KB Memory, 20,000 Reading)
       
    • Displays 10 Readings at the same time
       
    • Software to view Real Time Waveform
       
    • RS-232 interface / software

    $2450.00


     


    PROVA 6830
    $3650.00

    • Analysis for 1P2W, 1P3W, 3P3W, 3P4W
       
    • True RMS value (V 123 and I 123)
       
    • Active power (W, kW, MW, GW)
       
    • Apparent and reactive power (KVA, KVAR)
       
    • Power factor (PF), phase angle ()
       
    • Energy (WH, KWH, KVARH, PFH)
       
    • Current measurement from 0.1 mA to 3000A, capable of
      analysing IT standby power measurement consumption to the
      maximum demand of a factory
       
    • Display of 35 parameters in one screen (3P4W)
       
    • Programmable CT (1 to 600) and PT (1 to 3000)
       
    • Display of overlapped voltage & current waveform
       
    • Average demand (AD in W, KW, MW)
       
    • Maximum demand (MD in KW, MW, KVA, MVA)
      with programmable period
       
    • Harmonic analysis to the 99th order
       
    • Displays 50 harmonics in one screen with waveform

     

    • Displays waveform with peak values (1024 samples/period)
       
    • Analysis of total harmonic distortion (THD-F)
       
    • Graphic phasor diagram with 3 phase system parameters
       
    • Captures 28 transient events (time + cycles) with programmable threshold (%)
       
    • DIP, SWELL, and OUTAGE are included in transient events
       
    • 3 Phase voltage or current unbalanced ratio (VUR, IUR)
       
    • 3 Phase voltage or current unbalanced factor (d0%, d2%)
       
    • Analysis of total harmonic distortion (THD-F)
       
    • Calculated unbalanced current through neutral line (ln)
       
    • 512K memory with programmable interval (1 to 6000 seconds, 17000 records for 3P4W system)
       
    • Output of waveforme, power parameters
      and hamonics at command
       
    • Large Dot Matrix LCD display with backlight
       
    • Built-in timer and calendar for data logging
       
    • Option: 300XP portable thermal printer
       
    • Optical isolated RS-232C interface

     

    Ground Resistance Meter

    Prova 5600

    Clamp-on Ground Tester

     

     

    PRICE: $828.00

     

     

    Features:

    • Non-Contact Ground Resistance Measurement
       
    • No Auxiliary Electrode Needed
       
    • 0.025 - 1500
       
    • Ground Wire O 23mm/0.9
       
    • Leakage Current (0.200mA - 10.00mA)
       
    • Hi-Lo Alarm (Go - No Go)
       
    General Specifications:

    Jaw Opening: 23mm (0.9)
    Power Source: 9V Battery
    Power Consumption: 40mA
    Operating Temperature: 0C to 40C
    Operating Humidity: Less than 80% RH
    Dimensions: 258mm(L) x 100mm(W) x 47mm(H)
    10.2(L) x 4(W) x 1.9(H)
    Weight: 640g (1.4lbs)

    Electrical Specifications: (23C 5C)

    Groud Resistance (Autorange):
    Range
     
    • 0.025 ~ 0.250
       
    • 0.250 ~ 9.999
       
    • 10.00 ~ 99.99
       
    • 100.0 ~ 199.9
       
    • 200.0 ~ 400.0
       
    • 400.0 ~ 600.0
       
    • 600.0 ~ 1500.0


    Resolution
     

    • 0.002
       
    • 0.02
       
    • 0.04
       
    • 0.4
       
    • 2
       
    • 5
       
    • 20


    Accuracy of reading1
     

    • 1.5% 0.05
       
    • 1.5% 0.1
       
    • 2.0% 0.3
       
    • 3.0% 1.0
       
    • 5.0% 5
       
    • 10% 10
       
    • 20% (Approx.)


    1 Loop resistance noninductive, external field < 50A/m, external electrical field < 1V/m, conductor centered.

    2 Resistance Measurement Frequency: 1.667KHz
     

    Continuity
    Beep if resistance < 40.00 (Approximately)

    Ground / Leakage Current (Autorange, 50/60Hz, True RMS, Crest Factor < 3.0)

    Range
     
    • 0.200 ~ 1.000mA
       
    • 1.00 ~ 10.00mA
       
    • 10.0 ~ 100.0mA
       
    • 100 ~ 1000mA


    Resolution
     

    • 0.001mA
       
    • 0.01mA
       
    • 0.1mA
       
    • 1mA


    Accuracy of reading1
     

    • 2.5% 0.05mA
       
    • 2.5% 0.05mA
       
    • 2.0% 0.3mA
       
    • 2.0% 3mA


    Ground / Leakage Current (50/60Hz, True RMS, Crest Factor < 3.0)
    Range
     

    • 0.20 ~ 10.00A


    Resolution
     

    • 0.01A


    Accuracy of reading1
     

    • 2.0% 0.03A

    Click image to enlarge - Ground Resistance Meter
    PROVA 5601
    $1499.00



     

    • Non-Contact Ground Resistance Measurement
       
    • No Auxiliary Electrode Needed
       
    • 0.025 - 1500
       
    • Ground Wire O 23mm/0.9
       
    • Leakage Current (0.200mA - 10.00mA)
       
    • Hi-Lo Alarm (Go - No Go)
       
    • Memory of 116 records
       
    • Programmable Data Logging
       
    • Auto Detect of Jaw Open and Ground Noise
       
    • Compliant with Safety Standard EN61010-2

    General Specifications:

    Jaw Opening: 23mm (0.9)
    Power Source: 9V Battery
    Power Consumption: 40mA
    Operating Temperature: 0C to 40C
    Operating Humidity: Less than 80% RH
    Dimensions: 258mm(L) x 100mm(W) x 47mm(H)
    10.2(L) x 4(W) x 1.9(H)
    Weight: 640g (1.4lbs)

    Electrical Specifications: (23C 5C)

    Groud Resistance (Autorange):
    Range
    • 0.025 ~ 0.250
       
    • 0.250 ~ 9.999
       
    • 10.00 ~ 99.99
       
    • 100.0 ~ 199.9
       
    • 200.0 ~ 400.0
       
    • 400.0 ~ 600.0
       
    • 600.0 ~ 1500.0


    Resolution

    • 0.002
       
    • 0.02
       
    • 0.04
       
    • 0.4
       
    • 2
       
    • 5
       
    • 20


    Accuracy of reading1

    • 1.5% 0.05
       
    • 1.5% 0.1
       
    • 2.0% 0.3
       
    • 3.0% 1.0
       
    • 5.0% 5
       
    • 10% 10
       
    • 20% (Approx.)


    1 Loop resistance noninductive, external field < 50A/m, external electrical field < 1V/m, conductor centered.

    2 Resistance Measurement Frequency: 1.667KHz
     

    Continuity
    Beep if resistance < 40.00 (Approximately)

    Ground / Leakage Current (Autorange, 50/60Hz, True RMS, Crest Factor < 3.0)

    Range
    • 0.200 ~ 1.000mA
       
    • 1.00 ~ 10.00mA
       
    • 10.0 ~ 100.0mA
       
    • 100 ~ 1000mA


    Resolution

    • 0.001mA
       
    • 0.01mA
       
    • 0.1mA
       
    • 1mA


    Accuracy of reading1

    • 2.5% 0.05mA
       
    • 2.5% 0.05mA
       
    • 2.0% 0.3mA
       
    • 2.0% 3mA


    Ground / Leakage Current (50/60Hz, True RMS, Crest Factor < 3.0)
    Range

    • 0.20 ~ 10.00A


    Resolution

    • 0.01A


    Accuracy of reading1

    • 2.0% 0.03A

    Click image to enlarge - Ground Resistance Tester
    PROVA 5637
    $1650.00


     

    • Non-Contact Ground Resistance Measurement
       
    • No Auxiliary Electrode Needed
       
    • Jaw Diameter 35 mm
       
    • Jaw Opening 38 mm
       
    • Range 0.025 1500 Ohm
       
    • 116 Sets of Memory
       
    • Programmable Hi and Lo Alarm
       
    • Programmable Data Logging


    Digital Earth Tester
     

    TES-1700

    PRICE: $442.80

    Features:

    • To ensure the satisfactory earth installation for electricity supply, wiring safety and communication system
       
    • Earth voltage 0-400V (50Hz / 60Hz)
       
    • Earth Resistance 0-40, 0-400 & 0-4000
       
    • Capable of measuring earth voltage.
       
    • Data hold function.
       
    • Auto power off function.
       
    • Auto power off function:
      The timer operates automatically about 3 minutes when the Test Button Switch are pressed to keep the tester power on.
       
    • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
       
    • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accesories. (unit can be hung
      from the neck for simplified measurement).
       
    • Automatic warning when resistance of auxiliary earth Spikes is in excess of tolerance
       
    • Designed to meet IEC1010-1 safety standard.
       

     

    Digital Insulation Tester


    1010T
    Price: $57.00


    ZC11D-4
    Price: $70.00

    Click image to enlarge - Insulation Tester

    MTP 4010

    • 1 mA test currrent for meg ohm range at rate voltage
       
    • Large dual display with backlight
       
    • Test hold function for easy operation
       
    • Over range indication
       
    • Low battery indication

    $199.00



     

    TES 1601
    Click image to enlarge - Autoranging Insulation Tester
    $499.00


     

    • 4000 M/V Reading/10,000M analog indication
       
    • Test Hold function easy to catch up the value
       
    • Backlight illumination
       
    • 3-3/4 Digital LCD, 4000 Counts
       
    • Autorange for Mega Ohm range
       
    • 50 segments Log Scaled Analog Display
       
    • Easy to carry testing package
       
    • Tests insulation at rated voltage into a 1mA load
       
    • 200mA short circuit continuity current
       
    • Meet VDE 0413
       

    VDE 0413 / IEC 1010
    General Specifications:


    Display: 80 x 50mm Big LCD Panel with 50 segments analog display Max Reading 4000
    Over Range Indication: OL will be shown on the LCD Panel when out of range measurement is made
    Low Battery Indication: The will be shown when the battery needs to be changed
    Sampling Time: 2.5 times/sec Digital Display 10 times/sec Bargraph
    Power Source: Eight 1.5Volt AA size Battery
    Operating Temperature and Humidity: 0C to 40C (32F to 104F), below 80% RH
    Storage Temperature: -10C to 60C (14F to 140F)
    Dimensions: 200(L) x 140(W) x 95(H)mm
    Weight: Approx. 900g (with battery)
    Accessories: Test Lead, Battery, Instruction Manual

    Electrical Specifications:

    AC Voltage

    Range: 600V ACV
    Resolution: 0.1V
    Accuracy: 1.5% rdg + 3 dgt (1V~600V)

    Continuity
    Range: 400 (Ish>200mA)
    Resolution: 0.1
    Accuracy: 1% rdg + 5 dgt

    Meg Ohm
    Range:
    4000M/250V w/autorange 4000M/400M/40M/4M
    4000M/500V w/autorange 4000M/400M/40M/4M
    4000M/1000V w/autorange 4000M/400M/40M/4M
    Resolution: 4000M/250V, 1 Count/1K
    4000M/500V, 1 Count/1K
    4000M/1000V, 1 Count/1K
    Accuracy: 3% rdg + 5 Count (under 1G)
    5% rdg + 3 Count (under 4G)

    TES 3660
    Click image to enlarge - Insulation Tester
    $299.00


     

    • Large LCD with analog bar graph and digital display
       
    • 250V, 500V, 1000V output voltage for insulation MOhms testing
       
    • 4000MOhms insulation testing with automatically switch to voltage measurement
       
    • Lo OHM function for testing connections
       
    • Autodischarge of capacitive voltage charges
       
    • Last reading Hold display
       
    • AC/DC voltage measurement up to 1000V
       
    • Manual data memory and read function (9sets)
       
    • Meets EN61557 and EIC1010-1, CAT III 1000V
       
    • Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H)
       

    MTP 4050

    $750.00

    • Smart microprocessor controlled
       

    • Insulation resistance auto ranging on all ranges
       

    • Bar graph indicates test voltage rise and decay can be observed during tests
       

    • Warning and display of external voltage presence
       

    • Measuring insulation test time

    MTP 6213 AIN

    $1045.00

    • Variable high voltage 500V - 10 kV
       
    • Shows dielectric absorption ration and polarization index
       
    • Voltage steps of 500V
       
    • Color coded terminals-test leads
       
    • Warning voltage detection
       
    • Large LCD display with timer
       
    • Fast calculation and display
       
    • Automatic discharge of circuits
       
    • Guard connection to reduce errors

    Included accessories: 8 x C batteries, test leads, shoulder belt, integrated carrying case

     

    Autoranging Insulation Tester

    TES-1601

    Click image to enlarge - Autoranging Insulation Tester

     

    PRICE: $454.80

     

    Electrical Specifications:

    AC Voltage

    Range: 600V ACV
    Resolution: 0.1V
    Accuracy: 1.5% rdg + 3 dgt (1V~600V)

    Continuity
    Range: 400 (Ish>200mA)
    Resolution: 0.1
    Accuracy: 1% rdg + 5 dgt

    Meg Ohm
    Range:
    4000M/250V w/autorange 4000M/400M/40M/4M
    4000M/500V w/autorange 4000M/400M/40M/4M
    4000M/1000V w/autorange 4000M/400M/40M/4M
    Resolution: 4000M/250V, 1 Count/1K
    4000M/500V, 1 Count/1K
    4000M/1000V, 1 Count/1K
    Accuracy: 3% rdg + 5 Count (under 1G)
    5% rdg + 3 Count (under 4G)

    Features:
    • 4000 M/V Reading/10,000M analog indication
       
    • Test Hold function easy to catch up the value
       
    • Backlight illumination
       
    • 3-3/4 Digital LCD, 4000 Counts
       
    • Autorange for Mega Ohm range
       
    • 50 segments Log Scaled Analog Display
       
    • Easy to carry testing package
       
    • Tests insulation at rated voltage into a 1mA load
       
    • 200mA short circuit continuity current
       
    • Meet VDE 0413
       

    VDE 0413 / IEC 1010
    General Specifications:


    Display: 80 x 50mm Big LCD Panel with 50 segments analog display Max Reading 4000
    Over Range Indication: OL will be shown on the LCD Panel when out of range measurement is made
    Low Battery Indication: The will be shown when the battery needs to be changed
    Sampling Time: 2.5 times/sec Digital Display 10 times/sec Bargraph
    Power Source: Eight 1.5Volt AA size Battery
    Operating Temperature and Humidity: 0C to 40C (32F to 104F), below 80% RH
    Storage Temperature: -10C to 60C (14F to 140F)
    Dimensions: 200(L) x 140(W) x 95(H)mm
    Weight: Approx. 900g (with battery)
    Accessories: Test Lead, Battery, Instruction Manual

     

     

    Phase & Motor Rotation Meter

    MTP-8010

     

    Click image to enlarge - Phase Sequence Detector

     

    PRICE: $130.80

    Features:
    • Three functions in one unit
      Including open phase, phase sequence and motor rotation indication.
       
    • Large size alligator clips
      Can easily hold terminals of switchboards.
       
    • Highly reliable.
      Identifies 3 phases sequence and open phase check.
       
    • Functional design
      This model is ideal for installing conveyor lines, pump systems and interconnected drivers.
    IEC801-3; EN61010-IZ
    EN50081-1, EN50082-1
    IEC-1010
    600V Cat. III

    Input voltage: 100V AC up to 600V AC max.

    Frequency range: 45 to 70Hz

    Circuit Structure: All electronic (not mechanical)

    Power Requirement: 006P DC 9V battery

    Power Consumption current approx.: 14mA of motor rotation filed tester
    AC power consumption approx. 7mA per phase rotation filed indicator

    Dimensions: 153mm(L) x 72mm(W) x 35mm(H)

    Weight: Approx. 182g battery included

    Accessories: Test leads (red, black & white), vinyl case, instruction manual

     

    Digital Tachometer


    Digital Photo / contact tachometer

    Multi-function, one instrument combine PHOTO TACH (RPM) & CONTACT TACH. (RPM,m/min..ft/min.)

    Wide measuring range from 0.5 to 100,000RPM.

    The last value/max. value/min. value will be automatically stored in memory and can be obtained by pressing MEMORY CALL BUTTON.

    High visible, insignificant zero suppression LCD display gives exact  RPM with no guessing or errors and saves battery energy
     

    DT-2236
    was: $88.00
    Now: $68.00

       
    Click image to enlarge - Tachometer
    MTP PS-700
    $895.00

    • Brightest flash of any strobe in it's class
       
    • Long run per charge time
       
    • User adjustable flash rates
       
    • Buttons for easy X2 and /2 adjustment
       
    • Phase shift mode for full inspection of gears and rolls
       
    • Alphanumeric LCD display with easy uder interface
       
    • One hand operation for right or left-handed operators
       
    • User adjustable flash ratesRemovable battery with built-in charge electronics
       
    • User adjustable flash ratesExternal trigger and clock output

     

    Click image to enlarge - Tachymиtre
    PROVA RM-1500 K
    $355.00

    • Digital tachometer with 5 digits LCD display
       
    • Optical and contact measurements
       
    • Max/min/hold and true average
       
    • Autorange RPM
       
    • Measures RPM, m/min, ft/min, yard/min

     

     

    RM-1500 (Optical & Contact)

    RM-1500-1 (Optical Only)

    RM-1501 (RS-232)

    RM-1502 (Contact adaptor)

    Click image to enlarge - Digital Tachometer

     

    RM-1500 PRICE: $334.80

     

    RM-1500-1 PRICE: $240

     

    RM-1501 PRICE: $399.60

     

    RM-1501 PRICE: $138

    General Specifications:

    Display: 5 digits 99999 counts
    Sampling Rate: 1sec ( >60rpm); >1sec ( <60rpm)
    Measuring Distance: 50 to 300mm
    Time Base: 4.0MHz Quartz Crystal
    Range Selection: Automatic
    Battery: Four 1.5V batteries (AA, UM-3)
    Power Consumption: 1.5mA (Idle) 5mA (1000.0~99999rpm) 25mA (10.00~999.99rpm)
    Auto Power Off: 30 minutes
    Operating Temp.: 0 to 50C (32 to 122F)
    Size: 172 x 63 x 36mm (6.8 x 2.5 x 1.5)
    Weight: 190g (6.7oz) including battery
    Accessories: Carrying case, Reflective tape, Instruction manual

    Features:

    • 5 Digits LCD Display
       
    • Light Reflex Measuring
       
    • Range 10.0 to 99,999 RPM
       
    • Measuring Distance 50 to 300mm
       
    • Sampling Rate: 1 Second/Time
      (>60 RPM);
       
    • Combination type for non-contact and contact measurements
       
    • Counter (0-99999)
       
    • Both contact RPM measurement and circumferential velocity
      measurement in one simple
      adaptor
       
    • Max/Min/Hold
       
    • Autorange RPM
       
    • RS-232 (RM-1501)
       
    • Contact RPM and circumferential
      velocity measurements in one simple
      adaptor (RM-1502)
       

     

     

    Automotive Meter


    BT-300
    Price: $93.75

    Click image to enlarge - Automotive DMM
    MTP 1550
    $175.00
     

    • RPM measurement for automotive engines with 1 to 12 cylinders using the inductive pick-up
       
    • Oversize high contrast 4000 counts LCD display with backlight and bar graph
       
    • 14 functions including DCV, ACV, DCA, ACA, resistance, RPM(tach), dwell angle, duty cycle, pulse, period, frequence, capacitance, continuity and diode check
       
    • Read pulse, duty cycle and dwell angle for electronic fuel injection feedback carburators and ignition
       
    • Data hold and relative functions
       
    • Over range indication
       
    • Auto power off
       
    • Fused current inputs and overload projection on all ranges
       
    • Measures milliseconds pulse with to test on time of fuel injectors, idle air control motor and electronic transmission controls

    TES-1550

    Click image to enlarge - Automotive Multimeter

    PRICE: $240.00

    Features:

    • Engine RPM Measurement
       
    • Auto power off
       
    • Waterproof ABS housing
       

     

     
    EN61010-1
    1000V CAT III POLLUTION 2

    Tacho: 10~10,000 RPM
    Accuracy: (2% rdg + 1 dgt)
    Resolution: 10RPM

    Dwell
    Range: %/4CYL/6CYL/8CYL
    Accuracy: (2% rdg + 1 dgt)
    Resolution: 1% (1)

    Voltage (DC/AC) (Autorange/Manual)
    Range: 400m/4/40/400/750V (AC)/1000V (DC)
    Accuracy: DC (0.5% rdg + 1 dgt)
    AC (1.2% rdg + 5 dgts)
    Resolution: 100V

    OHMS (Resistance): (Autorange/Manual)
    Range: 400/4K/40K/400K/4M/40M
    Accuracy: (0.8% rdg + 3 dgts)
    (1.5% rdg + 5 dgts) for 40M Range

    Current (DC/AC) (Autorange/Manual)
    Range: 40m/400m/20A (DC/AC)
    Accuracy:
    DC (1.0% rdg + 1 dgt) for 40m/400mA (1.5% rdg + 2 dgts) for 20A
    AC (1.5% rdg + 3 dgts) for 40m/400mA (2.0% rdg + 5 dgts) for 20A
    Resolution: 10A
    Continuity Beeper: 40
    Circuit Voltage: 0.5V

    Diode Test: ( )
    Accuracy: (1.0% + 2 dgts)

    Capacitance: (Autorange/Manual) Cx
    Range: 4n/40n/400n/4/40F
    Accuracy: (1.5% rdg + 10 dgts)
    Resolution: 1pF

    Frequency (Autorange)
    Range: 100/1K/10K/100K/500KHz
    Accuracy: (0.1% rdg + 2 dgts)
    Resolution: 0.01Hz
    Sensitivity: 100mV/1V/10V

    Display:
    3-3/4 Digit LCD
    Maximum Reading 3999 with Bargraph
    Size & Weight:
    186mm(L) x 87mm(W) x 45mm(H) & 375g

    Accessories: Instruction Manual, Thermo Case TP-E06 & Test Leads, Holster Case

     

     

    Digital Automotive  Clamp-on Meter

    CM-04

     

    Click image to enlarge - AC/DC Automotive Clamp Meter

     

    PRICE: $296.40

    Features:

    • DC/AC Resolution 0.01A
       
    • Jaw Size 23mm Diameter
       
    • DCA, | | , One Touch Zero
       
    • Autorange C (or F), | | , V,
       
    • Continuity
       
    • 0-9999RPM
       
    • 3-3/4 Digits (4000 Counts)
       
    • Max/Min/Hold/Relative
       

     

    CE CAT. II 600V
    General Specifications


    Conductor Size: 23mm Diameter
    Battery: 1.5V AA UM3 Battery x 2
    Display: 3-3/4 Digits (4000 Counts)
    Range Selection: Auto and Manual
    Power Consumption: 10mA Approx.)
    Sampling Time: 2 Times/Sec. (Digital), 20 Times/Sec. (Bargraph)
    Operating Temperature: 0C to 50C (32F to 122F)
    Operating Humidity: Less than 85% RH
    Dimension: 183mm(L) x 63.6mm(W) x 35.6mm(H) 7.2(L) x 2.5(W) x 1.4(H)
    Weight: 190g (Batteries included)

    Electrical Specification (23C 5C) DC Current
    Range: 40A/0-150A/150-200A
    Resolution: 10mA/0.1A
    Accuracy: 1.5% rdg 2 dgts/ 1.5% rdg 3 dgts
    Overload Protection: 400A

    AC Current
    Range: 40A/0-150A/150-200A
    Resolution: 10mA/0.1A
    Accuracy (of reading):
    1.5% rdg 3 dgts/ 2.0% rdg 3 dgts (50/60Hz)
    2.5% rdg 3 dgts/ 3.0% rdg 3 dgts (40H-1KHz)
    Overload Protection: 400A

    DC Voltage (Autorange & Manual,
    Overload Protection 800VAC):

    Range: 400mV/4V/40V/400V/600V
    Resolution: 0.1mV/0.001V/0.01V/0.1V/1V
    Accuracy: 1.5% rdg 3 dgts
    Input Impedance: 10M/5M
    AC Voltage (Autorange & Manual,
    Input Impedance 5M):

    Range: 4V/40V/400V/600V
    Resolution: 0.001V/0.01V/0.1V/1V
    Accuracy: 1.5% rdg 5 dgts
    Overload Protection: 800VAC

    Resistance () & Audible Continuity (Open Circuit Voltage 0.5V):
    Range: 40~400
    Resolution: 0.1
    Accuracy: 1.0% rdg 5 dgts
    Beeper: 40 (approx.)
    Overload Protection: 600VAC

    Resistance () (Autorange & Manual, Open Circuit Voltage 0.5V):
    Range: 400/4K/40K/400K/4M/40M
    Resolution: 0.1/1/10/100/1K/10K
    Accuracy: 1.5% rdg 3 dgts
    Overload Protection: 600VAC

    Capacitance (Autorange & Manual):
    Range: 4nF/40nF/400nF/4uF/40uF/
    Resolution: 1pF/10pF/0.1nF/1nF/10nF
    Accuracy: 5% rdg 0.2nF/ 3.0% 0.2nF
    Overload Protection: 600VAC

    TEMP K TYPE C (Autorange & manual, F optional):
    Range: -40~0C/0~400C/400~1000C
    Resolution: 0.1C/1C
    Accuracy: 2.0% 2C/ 0.5% 1C/ 0.8% 1C
    Overload Protection: 600VAC/600V

    Accessories: Adaptor (for K-type Thermocouple and Capacitor), K-type Thermocouple, Carrying Bag, Users Manual, 1.5V Battery

    Option: RPM Adaptor

     

    Temperature & Humidity Meters


    MTP 1368
    $125.00

    • Fast Response Time %RH: 10S (90% at 25єC still air)
       
    • High accuracy
       
    • Dew Point Temperature
       
    • Wet Bulb Temperature
       
    • Resolution 0.01%RH, 0.01єC/0.01F
       
    • Max Hold and Data Hold Function
       
    • Micro Processor-based Design
       
    • Dual Display Temperature & Humidity
       
    • Auto Power Off, Disable Sleep Mode
       
    • Backlight
       
    • Mini Size

    Click image to enlarge - Thermometer - K.J.E.T. Printing
    TES 1304
    $599.00


     
    • Type K.J.E.T. Thermocouple Input
       
    • Dual Channels with multi-functions (T1, T2 & T1-T2)
       
    • Real-time clock calendar & C/F Switch
       
    • 0.1% of reading high Accuracy & MAX/MIN/AVG Display
       
    • Built-in thermo printer with Time interval stting (1304)
       
    • RS-232 Datalogging Capacity (1305)

    Display: 4-1/2 LCD Digital Display
    Measurement Range:
    Type K: -200~1370C (-328~2498F)
    Type J: -200~760C (-328~1400F)
    Type E: -200~1000C (-328~1832F)
    Type T: -200~400C (-328~752F)
    Resolution: 0.1C/0.2F
    Input Protection: 60VDC/24Vrms
    Sampling Rate: 2 times/1 sec.
    Operating Temperature: 0~50C / 32~122F)
    Operating Humidity: 10~90% RH
    Storage Temperature: -10~+60C (14~140F),
    Storage Humidity: 10~75%RH
    Power Supply: 6 pcs size AAA Alkaline Battery / 9V~16V adaptor socket pin available PS-101
    Battery Life: About 50 hours
    (not including printer)
    Dimensions: 193(L) x 74(W) x 37(H)mm
    Weight: Approx. 365g (including batteries)
    Internal peripheral equipment:
    Thermo-printer
    Accessories: Carrying case, Instruction manual, Batteries, 2 Rolls thermo-paper

    Click image to enlarge - Pocket digital Thermometer
    MTP ST-9238B
    $24.95

    • 1 diameter pocket thermometer
       
    • Easy-to-read LCD numerals
       
    • Fahreinheit/Celsius switchable
       
    • Wide measurement range -58
      to 302F and -50 to 150 C
       
    • Accuracy: 2F or 1C
       
    • Display updates every one second

    Features:
    • 1 diameter pocket thermometer
       
    • Easy-to-read LCD numerals
       
    • Fahreinheit/Celsius switchable
       
    • Wide measurement range -58
      to 302F and -50 to 150 C
       
    • Accuracy: 2F or 1C
       
    • Display updates every one second
       
    • Powered by 1.5V watch battery,
      included. Free spare battery
       
    • 5 stainless steel stem
       
    • Immerse stem at least 1
      for accurate reading
       
    • Handy nylon case with shirt
      pocket clip included
    Applications:
    • Food Service Processing
       
    • HVAC
       
    • Scientific and Laboratory
       
    • Transportation and Warehousing
       
    • Agriculture and Horticulture
       
    • Automative Service & repair
       
    • Equipment Maintenance
       
    • Household

    Click image to enlarge - Thermometer
    TES 1311
    $116.00

    • Type K Thermocouple Input
       
    • Autorange resolution 0.1 / 1
       
    • With C, F & K switching
       
    • Offset (Relative) function
       
    • MAX / MIN / AVG with elapse time function
       
    • Data Hold Function
       
    • Room temperature compensated
       
    • Flip-up stand
       
    • Backlight LCD display

    Click image to enlarge - Thermometer
    TES 1312A
    $165.00

    • Type K Thermocouple Input
       
    • Autorange resolution 0.1 / 1
       
    • With C, F & K switching
       
    • Offset (Relative) function
       
    • MAX / MIN / AVG with elapse time function
       
    • True average 8 hours reading
       
    • Data Hold Function
       
    • Watch Timer function
       
    • Room temperature compensated
       
    • T1 & T2 dual points display
       
    • T1 T2 differential measurement
       
    • Flip-up stand
       
    • Backlight LCD display

    Click image to enlarge - Datalogging Thermometer
    TES 1316
    $375.00

    • Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type
       
    • Dual input function T1/T2 temperature display
       
    • 7500 Datalogging capacity
       
    • Warning beeper with TIME, MAX-MIN AVG, HOLD function
       
    • C/F/K User-Selective
       
    • Backlight LCD display

    Click image to enlarge - RTD Thermometer
    TES 1317
    $155.00

    • Pt 3916/3926/385 RTD standard
       
    • 97 Data Logging capacity
       
    • Warning beeper with HI/LO setting
       
    • Time setting
       
    • MAX / MIN with TIME, MAX-MIN AVG Hold function
       
    • C/F/K User-Selective
       
    • Back light LCD display

     

    Click image to enlarge - Infrared Thermometer
    TES 1326
    $135.00

    • C/F Selectable
       
    • Back-light LCD display
       
    • Laser targeting
       
    • Auto Hold function
       
    • Maximum/Minimum reading recorder function
       
    • Data memory and read function
       
    • Auto-power off

    Click image to enlarge - Infrared Thermometer
    TES 1327K
    $225.00

    • C/F Selectable
       
    • Back-light LCD display
       
    • Laser targeting
       
    • Adjustable emissivity and type K thermocouple input
       
    • Audible and visible alarm
       
    • Data memory and read fonction
       
    • For HVAC, plant maintenance, food industiy etc

    Temperature & Humidity Meters
     

    TES 1364
    Click image to enlarge - Digital Thermo Hygrometer
    $225.00

    • Detachable sensing probe.
       
    • Data Hold & Relative function.
       
    • Dual LCD display with Bargraph indication.
       
    • Datalogging capacity 10,100 dual reading. (%RH & Temp). (TES-1365)
       
    • Dew Point Range: -10C ~ 50C
       
    • RS-232 interface & Windows software. (TES-1365)
       
    • Wet Bulb Reading.
       
    • Automatic Timer Recording for Datalogger. (TES-1365)
       
    • MAX/MIN with Time Stamp.

    TES 1365
    Click image to enlarge - Data Logging Thermo Hygrometer
    $387.50

    • Detachable sensing probe.
       
    • Data Hold & Relative function.
       
    • Dual LCD display with Bargraph indication.
       
    • Datalogging capacity 10,100 dual reading. (%RH & Temp). (TES-1365)
       
    • Dew Point Range: -10C ~ 50C
       
    • RS-232 interface & windows software. (TES-1365)
       
    • Wet Bulb Reading.
       
    • Automatic Timer Recording for Datalogger. (TES-1365)
       
    • MAX/MIN with Time Stamp.

    Moisture Meter

    MTP ST-125
    Click image to enlarge - Moisture Meter
    $89.00

    • Measures moisture level in sawn timber (also cardboard)
       
    • Display moisture level
       
    • Electrode length of 8mm

  • Included accessories: 3 x CR2032 batteries
  • pH Meters

    Click image to enlarge - Data Logging Thermo Hygrometer

    TES 1380
    • Fast and Easy pH measurement
       
    • Dual LCD display shows pH/C&F or mV/C&F simultaneously
       
    • Logging 99 readings


    $499.00

    Specifications

    Circuit: Custom one-chip of microprocessor LSI circuit
    Display: Super large LCD display
    Measurement
    pH: 0 to 14 pH
    mV: 0 to 600mV
    Temperature: 0 to 100C, 32 to 212F
    Input Impedance: 1012
    Temperature Compensation:
    Manual: 0 to 100C, adjusting by push button on front panel
    For pH Range:
    Automatic: With the optional TEMP probe, 0 to 100C
    Calibration For pH Range Built in SLOPE (pH 4) & Cal. (pH 7)
    Data Hold: To auto hold the reading values on display
    Memory Recall: Max 99 points
    Power off: Auto shut off 10 minutes saves battery life, or manual off by push button
    Over Input Indication Indication of -- -- -- --
    pH Electrode: Any combination pH electrode with BNC connector
    Operating Temperature: 0C to 50C (32F to 122F)
    Operating Humidity: Max 80% RH
    Sampling time: Approx. 0.18 second
    Power Supply: 006P DC 9V battery (Heavy duty type)
    Battery Life: 200 hours (approx.)
    Accessories: Carrying case, Instruction manual, Battery, pH electrode, Temperature probe, pH Standard Buffer Solution

    Battery Tester


    BT-300
    Price: $93.75

    Click image to enlarge - Battery Capacity Tester
    TES 32
    $945.00

    • Test Condition Without Shutting Down Battery
       
    • Simultaneously Measure Battery Resistance, Voltage
       
    • Comparator Function
       
    • Rates Conditions as Pass, Warning, or Fail
       
    • Memory and Read Function
       
    • Compact and Lightweight
       
    • RS232 PC Interface

    Click image to enlarge - Battery Capacity Tester
    TESS 33
    $1450.00

    • Reads the true life of battery capacity
      (resistive / voltage / current & temperture (-20C to 60C))
       
    • Built-in comparator
       
    • RS-232 interface / software
       
    • Datalogging function up to 6000 data sets
       
    • Load test analysis (charge / discharge)
       
    • Battery capacity from 0 to 1200AH
       
    • Type tested: compact storage, alkaline and lead acid batteries


    Receptacle Tester

    Click image to enlarge - GFI Receptacle Tester
    MTP 110
    $15.00

    • Detects faulty wiring in 3 wire receptacle
       
    • Light pattern indicates condition of wiring
       
    • Trips GFI receptacle to indicate receptacle is operational